Characteristics of polyether urethanes with mixed soft segments, prepared by two- and three-step procedures
- 作者: Tereshatov V.V.1, Slobodinyuk A.I.1, Makarova M.A.1, Vnutskikh Z.A.1, Pinchuk A.V.1, Senichev V.Y.1
-
隶属关系:
- Institute of Technical Chemistry, Ural Branch
- 期: 卷 89, 编号 6 (2016)
- 页面: 943-948
- 栏目: Macromolecular Compounds and Polymeric Materials
- URL: https://journals.rcsi.science/1070-4272/article/view/213971
- DOI: https://doi.org/10.1134/S1070427216060161
- ID: 213971
如何引用文章
详细
A three-step procedure for preparing polyurethanes with mixed polyether segments was suggested. It involves preparation of the “inverse” prepolymer by the reaction of one of oligodiisocyanates with 1,4-butanediol taken in a double excess, followed by the reaction with the other oligodiisocyanate. Polyurethanes with alternating poly(tetramethylene oxide) and poly(propylene oxide) soft segments were prepared by this procedure. Such materials surpass polyurethanes prepared from a mixture of oligodiisocyanates in the strength and softening point of the hard phase. In contrast to poly(tetramethylene oxide) urethane, elastomers with mixed polyether segments do not crystallize.
作者简介
V. Tereshatov
Institute of Technical Chemistry, Ural Branch
编辑信件的主要联系方式.
Email: tvvz@mail.ru
俄罗斯联邦, ul. Akademika Koroleva 3, Perm, 614013
A. Slobodinyuk
Institute of Technical Chemistry, Ural Branch
Email: tvvz@mail.ru
俄罗斯联邦, ul. Akademika Koroleva 3, Perm, 614013
M. Makarova
Institute of Technical Chemistry, Ural Branch
Email: tvvz@mail.ru
俄罗斯联邦, ul. Akademika Koroleva 3, Perm, 614013
Zh. Vnutskikh
Institute of Technical Chemistry, Ural Branch
Email: tvvz@mail.ru
俄罗斯联邦, ul. Akademika Koroleva 3, Perm, 614013
A. Pinchuk
Institute of Technical Chemistry, Ural Branch
Email: tvvz@mail.ru
俄罗斯联邦, ul. Akademika Koroleva 3, Perm, 614013
V. Senichev
Institute of Technical Chemistry, Ural Branch
Email: tvvz@mail.ru
俄罗斯联邦, ul. Akademika Koroleva 3, Perm, 614013
补充文件
