Enviar artigo por via de e-mail Machining by End Mills with Overlapping Cutter–Workpiece Contacts
- Autores: Gubanova A.A.1
-
Afiliações:
- Don State Technical University
- Edição: Volume 38, Nº 9 (2018)
- Páginas: 714-716
- Seção: Article
- URL: https://journals.rcsi.science/1068-798X/article/view/227525
- DOI: https://doi.org/10.3103/S1068798X18090149
- ID: 227525
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
This study addresses the influence of cutting forces and mill deformation on the surface quality obtained in machining. A mathematical model is proposed for calculating the trajectory of mill deformation in the shaped surface. Tests confirm the adequacy of the model.
Palavras-chave
Sobre autores
A. Gubanova
Don State Technical University
Autor responsável pela correspondência
Email: anatoliya81@mail.ru
Rússia, Rostov-on-Don
Arquivos suplementares
