Email this article Influence of Nut Design on the Load Distribution over the Turns of a Screw
- Authors: Ivanov A.S.1, Koroleva O.B.1
-
Affiliations:
- Bauman Moscow State Technical University
- Issue: Vol 38, No 3 (2018)
- Pages: 147-150
- Section: Article
- URL: https://journals.rcsi.science/1068-798X/article/view/227394
- DOI: https://doi.org/10.3103/S1068798X1803005X
- ID: 227394
Cite item
Open Access
Access granted
Subscription Access
Abstract
Screw turns are known to be deformed as a result of the contact pliability of the nut and screw surfaces. The load distribution over the turns is investigated when fine thread is employed, when compression nuts are replaced by tension–compression and tension nuts, when the roughness of the working surfaces is increased, and when the load on the screw is increased.
Keywords
About the authors
A. S. Ivanov
Bauman Moscow State Technical University
Author for correspondence.
Email: a-s-ivanov@yandex.ru
Russian Federation, Moscow
O. B. Koroleva
Bauman Moscow State Technical University
Email: a-s-ivanov@yandex.ru
Russian Federation, Moscow
Supplementary files
