Enviar artigo por via de e-mail Lathe turning of complex-shaped parts providing desired surface microrelief
- Autores: Grechishnikov V.A.1, Petukhov Y.E.1, Pivkin P.M.1, Isaev A.V.1, Romanov V.B.1, Domnin P.V.1
-
Afiliações:
- Stankin Moscow State Technical University
- Edição: Volume 36, Nº 3 (2016)
- Páginas: 229-231
- Seção: Article
- URL: https://journals.rcsi.science/1068-798X/article/view/226260
- DOI: https://doi.org/10.3103/S1068798X16030059
- ID: 226260
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
The machining of complex parts with surface shaping by different sections of the cutting edge is considered.
Palavras-chave
Sobre autores
V. Grechishnikov
Stankin Moscow State Technical University
Email: pmpivkin@gmail.com
Rússia, Moscow
Yu. Petukhov
Stankin Moscow State Technical University
Email: pmpivkin@gmail.com
Rússia, Moscow
P. Pivkin
Stankin Moscow State Technical University
Autor responsável pela correspondência
Email: pmpivkin@gmail.com
Rússia, Moscow
A. Isaev
Stankin Moscow State Technical University
Email: pmpivkin@gmail.com
Rússia, Moscow
V. Romanov
Stankin Moscow State Technical University
Email: pmpivkin@gmail.com
Rússia, Moscow
P. Domnin
Stankin Moscow State Technical University
Email: pmpivkin@gmail.com
Rússia, Moscow
Arquivos suplementares
