Enviar artigo por via de e-mail Spark plasma sintering of cutting plates
- Autores: Yushin D.I.1, Smirnov A.V.1, Solis Pinargote N.1, Peretyagin P.Y.1, Kuznetsov V.A.2, Torrecillas R.1,3
-
Afiliações:
- Stankin Moscow State Technical University
- Moscow Statel University of Mechanical Engineering (MAMI)
- Centro de Investigación en Nanomateriales y Nanotecnologia (CINN)
- Edição: Volume 36, Nº 5 (2016)
- Páginas: 410-413
- Seção: Article
- URL: https://journals.rcsi.science/1068-798X/article/view/226564
- DOI: https://doi.org/10.3103/S1068798X16050233
- ID: 226564
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
Numerical modeling of the spark plasma sintering of square plates from aluminum-oxide and tungsten-carbide powder is considered. The rounding radius of the plates is 0.8, 1.2, or 1.6 mm. The distribution of the temperature and mechanical stress within each sample and also within the mold is determined. The results are used for preliminary assessment of the possibility of spark plasma sintering of cutting plates.
Palavras-chave
Sobre autores
D. Yushin
Stankin Moscow State Technical University
Autor responsável pela correspondência
Email: yushindenis@gmail.com
Rússia, Moscow
A. Smirnov
Stankin Moscow State Technical University
Email: yushindenis@gmail.com
Rússia, Moscow
N. Solis Pinargote
Stankin Moscow State Technical University
Email: yushindenis@gmail.com
Rússia, Moscow
P. Peretyagin
Stankin Moscow State Technical University
Email: yushindenis@gmail.com
Rússia, Moscow
V. Kuznetsov
Moscow Statel University of Mechanical Engineering (MAMI)
Email: yushindenis@gmail.com
Rússia, Moscow, 107023
R. Torrecillas
Stankin Moscow State Technical University; Centro de Investigación en Nanomateriales y Nanotecnologia (CINN)
Email: yushindenis@gmail.com
Rússia, Moscow; Oviedo
Arquivos suplementares
