Influence of tool wear on the heat-flux distribution and temperature at the contact surfaces in the end milling of OT4 titanium alloy

D. V. Evdokimov; D. L. Skuratov; D. G. Fedorov

doi:10.3103/S1068798X16040043

Influence of tool wear on the heat-flux distribution and temperature at the contact surfaces in the end milling of OT4 titanium alloy

作者: Evdokimov D.V.¹, Skuratov D.L.¹, Fedorov D.G.¹
隶属关系:
1. Korolev Samara State Aerospace University
期: 卷 36, 编号 4 (2016)
页面: 324-327
栏目: Article
URL: https://journals.rcsi.science/1068-798X/article/view/226422
DOI: https://doi.org/10.3103/S1068798X16040043
ID: 226422

如何引用文章

全文:

开放存取

##reader.subscriptionAccessGranted##
受限制的访问

订阅存取

详细
作者简介
参考
补充文件
统计

详细

The influence of tooth wear at the flank surface on the heat-flux density due to plastic deformation, chip friction at the tooth’s rake surface, and friction of the flank surface at the workpiece in end milling is considered. The dependence of the cutting temperature on the tool wear is obtained. The thermal field in the tool is calculated.