Email this article Calculating the Manufacturing Parameters of a Shaver and Roller System Used to Produce Round-Tooth Cylindrical Gears
- Authors: Malikov A.A.1, Sidorkin A.V.1, Vasilyev A.S.2, Artamonov V.D.1
-
Affiliations:
- Tula State University
- Bauman Moscow State Technical University
- Issue: Vol 39, No 11 (2019)
- Pages: 973-976
- Section: Article
- URL: https://journals.rcsi.science/1068-798X/article/view/228108
- DOI: https://doi.org/10.3103/S1068798X19110145
- ID: 228108
Cite item
Open Access
Access granted
Subscription Access
Abstract
Determination of the parameters of a shaver and roller system for finishing the round teeth of cylindrical gears is considered. Algorithms are proposed for selecting machining pathways appropriate to the gear crown of the shaver and roller system. A mathematical model is derived for calculating the radii of curvature of the convex and concave sides of its teeth.
About the authors
A. A. Malikov
Tula State University
Author for correspondence.
Email: andrej-malikov@yandex.ru
Russian Federation, Tula, 300012
A. V. Sidorkin
Tula State University
Author for correspondence.
Email: alan-a@mail.ru
Russian Federation, Tula, 300012
A. S. Vasilyev
Bauman Moscow State Technical University
Author for correspondence.
Email: vas@bmstu.ru
Russian Federation, Moscow, 105005
V. D. Artamonov
Tula State University
Author for correspondence.
Email: v.d.art@mail.ru
Russian Federation, Tula, 300012
Supplementary files
