| Шығарылым |
Атауы |
Файл |
| Том 36, № 8 (2016) |
Improving the performance of metal-cutting tools |
(Eng)
|
|
Khramov A., Leksin E., Semdyankin I., Kiselev E., Nazarov M.
|
| Том 36, № 7 (2016) |
Stress–strain state of the valve spring in an auto engine during plastic hardening |
(Eng)
|
|
Zemlyanushnov N., Zemlyanushnova N., Porokhin A.
|
| Том 36, № 7 (2016) |
Design of flexible manufacturing systems on the basis of CAx software and virtual modeling |
(Eng)
|
|
Kul’ga K., Kitaev A., Sidorov I., Kozhinov D.
|
| Том 36, № 7 (2016) |
Monitoring the yield of a borehole neutron generator |
(Eng)
|
|
Altukhov A., Teplova T., L’vov S., Gladchenkov E., Afanas’ev S.
|
| Том 36, № 7 (2016) |
Using a tool with wear-resistant coatings in transverse cutting and thread cutting |
(Eng)
|
|
Tabakov V., Sagitov D.
|
| Том 36, № 7 (2016) |
Disk concentrators in a system for ultrasonic surface plastic deformation of screw threads |
(Eng)
|
|
Kolesnikov V., Nebogov S., Punin V., Evsyukov S., Fedotov I.
|
| Том 36, № 7 (2016) |
Stress concentration at the edge of a circular hole with unilateral annular reinforcement |
(Eng)
|
|
Kozhevnikov V., Firsanov V.
|
| Том 36, № 7 (2016) |
Properties of thick galvanic steel coatings |
(Eng)
|
|
Kopylov Y.
|
| Том 36, № 7 (2016) |
Manufacture of mandrels for the production of composite components by coiling |
(Eng)
|
|
Zuev A.
|
| Том 36, № 7 (2016) |
Non-destructive testing of residual stresses by magnetic methods under conditions of simple stressing |
(Eng)
|
|
Mahalov M., Blumenstein V.
|
| Том 36, № 7 (2016) |
Harmonic analysis of the kinematic error in a planetary roller screw |
(Eng)
|
|
Mamaev I., Morozov V., Fedotov O., Filimonov V.
|
| Том 36, № 7 (2016) |
Hybrid treatment by a laser beam and surface plastic deformation |
(Eng)
|
|
Gubanov V., Pesterev M.
|
| Том 36, № 7 (2016) |
Quantum-mechanical modeling of chip deformation and failure |
(Eng)
|
|
Kabaldin Y., Kuz’mishina A.
|
| Том 36, № 7 (2016) |
Internal grinding of thermoprotective rubber coatings |
(Eng)
|
|
Khanov A., Sirotenko L., Shingel’ L., Trofimov E.
|
| Том 36, № 7 (2016) |
Influence of misalignment of the reamer and spindle axes on the precision of the machined hole |
(Eng)
|
|
Zheleznov G., Shirokov A.
|
| Том 36, № 7 (2016) |
Cutting-system dynamics |
(Eng)
|
|
Zakovorotnyi V., Bykador V.
|
| Том 36, № 7 (2016) |
Coordinating the motion of a robot and the workpiece |
(Eng)
|
|
Dadochkin M.
|
| Том 36, № 7 (2016) |
Patent activity of high-tech enterprises in the Republic of Udmurtia |
(Eng)
|
|
Dombrachev A., Yakimovich B., Korshunov A., Solomennikova S.
|
| Том 36, № 7 (2016) |
Neural-network system for extremal control of the cutting precision |
(Eng)
|
|
Legaev V., Generalov L., Galkovskii O.
|
| Том 36, № 7 (2016) |
Surface roughness in final turning: Development of an adequate empirical model |
(Eng)
|
|
Bokov V.
|
| Том 36, № 6 (2016) |
Automated design of model sets in the manufacture of large structural castings for the basic components of mechatronic machine tools |
(Eng)
|
|
Kul’ga K., Vinogradov P.
|
| Том 36, № 6 (2016) |
Limiting deformation in rotary drawing of anisotropic pipe blanks with wall thinning |
(Eng)
|
|
Yakovlev S., Tregubov V., Osipova E.
|
| Том 36, № 6 (2016) |
Abrasive-jet machining of large hollow components |
(Eng)
|
|
Zakharov O., Khudobin L., Vetkasov N., Sklyarov I., Kochetkov A.
|
| Том 36, № 6 (2016) |
Turning of polymers with pulsed electromagnetic irradiation of the workpiece |
(Eng)
|
|
Erenkov O., Bogachev A.
|
| Том 36, № 6 (2016) |
Stress state of wear-resistant tool coatings |
(Eng)
|
|
Tabakov V., Chikhranov A.
|
| Нәтижелер 991 - 851/875 |
<< < 30 31 32 33 34 35 36 37 38 39 > >>
|
