| 期 |
标题 |
文件 |
| 卷 37, 编号 3 (2017) |
Hybrid laminated materials with slow fatigue-crack development |
(Eng)
|
|
Antipov V., Serebrennikova N., Senatorova O., Morozova L., Lukina N., Nefedova Y.
|
| 卷 37, 编号 3 (2017) |
Thermal model of spindles on rolling bearings |
(Eng)
|
|
Zverev I., Maslov A.
|
| 卷 37, 编号 3 (2017) |
Automatic control of a stepless mechanical transmission with an internal force function |
(Eng)
|
|
Blagonravov A., Yurkevich A., Yurkevich A.
|
| 卷 37, 编号 3 (2017) |
Electrical roasting systems with vibrational batch supply |
(Eng)
|
|
Nizhegorodov A.
|
| 卷 37, 编号 3 (2017) |
Evolution of methods of assessing the accuracy of metal-cutting machines |
(Eng)
|
|
Kuznetsov A.
|
| 卷 37, 编号 3 (2017) |
Software correction of volumetric geometrical errors of multi-axis systems based on laser interferometric measurements |
(Eng)
|
|
Teleshevsky V., Emelyanov P., Sokolov V.
|
| 卷 37, 编号 3 (2017) |
Protection of standard network protocols of automated production control systems |
(Eng)
|
|
Burtsev A., Klishevich D., Polyanskii A.
|
| 卷 37, 编号 3 (2017) |
Selection of metal-cutting machines in operational design by means of PLM systems |
(Eng)
|
|
Krestyaninov P., Khusainov R., Yurasov S., Grechishnikov V., Romanov V.
|
| 卷 37, 编号 3 (2017) |
Influence of clamping force on the machined surface in abrasive finishing |
(Eng)
|
|
Gashev E., Lagunov D., Muratov K.
|
| 卷 37, 编号 3 (2017) |
Measuring the optical density of wastewater by means of a diamond UV photodetector |
(Eng)
|
|
Shepelev V., Altukhov A., Gladchenkov E., Popov A., Teplova T., Feshchenko V., Zhukov A.
|
| 卷 37, 编号 3 (2017) |
Technological inheritance in the machining of titanium alloys |
(Eng)
|
|
Grechishnikov V., Pautov G., Yurasov S., Yurasova O.
|
| 卷 37, 编号 3 (2017) |
Precision of surfaces machined on a lathe with geometric errors |
(Eng)
|
|
Khusainov R., Yurasov S., Ziyatdinov R., Davletshina G., Grechishnikov V., Isaev A., Pivkin P.
|
| 卷 37, 编号 3 (2017) |
Improved machining of heat-resistant materials by high-temperature embrittlement in cutting |
(Eng)
|
|
Artamonov E., Vasil’ev D., Uteshev M.
|
| 卷 37, 编号 3 (2017) |
Energy losses in the electric motor of a high-speed spindle |
(Eng)
|
|
Ismagilov F., Khairullin I., Vavilov V., Bekuzin V., Gorbunov A., Karimov R.
|
| 卷 37, 编号 3 (2017) |
Abrasive tools for hole machining in robotic systems |
(Eng)
|
|
Grechishnikov V., Yashkov V., Pivkin P., Romanov V., Isaev A., Maslov A.
|
| 卷 37, 编号 3 (2017) |
Influence of the positional error of the axial drive module on the machining precision in a lathe |
(Eng)
|
|
Kadyrov R., Kudoyarov R.
|
| 卷 37, 编号 2 (2017) |
Programmable end milling of thermoplastics |
(Eng)
|
|
Emel’yanenko A., Zhabin O., Polyanchikov Y.
|
| 卷 37, 编号 2 (2017) |
Edge forces in machining by abrasive brushes |
(Eng)
|
|
Dimov Y., Podashev D.
|
| 卷 37, 编号 2 (2017) |
Damping characteristics of cable-based dampers and hydraulic bearings |
(Eng)
|
|
Gordeev B., Okhulkov S., Zlobin P.
|
| 卷 37, 编号 2 (2017) |
Determining the elastic modulus of a hard coating from the loading curve in indentation |
(Eng)
|
|
Voronin N.
|
| 卷 37, 编号 2 (2017) |
Energy-saving modular electric furnaces with energy recuperation |
(Eng)
|
|
Nizhegorodov A.
|
| 卷 37, 编号 2 (2017) |
Axisymmetric control valve for oil and gas equipment |
(Eng)
|
|
Karelin I.
|
| 卷 37, 编号 2 (2017) |
Drawing of two-layer axisymmetric anisotropic components with wall thinning |
(Eng)
|
|
Yakovlev S., Gryazev M., Pilipenko O.
|
| 卷 37, 编号 2 (2017) |
Cutting characteristics in the end milling of stainless steel |
(Eng)
|
|
Grubyi S.
|
| 卷 37, 编号 2 (2017) |
Verifying the geometric precision of machine tools |
(Eng)
|
|
Kadyrov R., Kudoyarov R.
|
| 701 - 725 的 991 信息 |
<< < 24 25 26 27 28 29 30 31 32 33 > >>
|
