Email this article Precision of surfaces machined on a lathe with geometric errors
- Authors: Khusainov R.M.1, Yurasov S.Y.1, Ziyatdinov R.R.1, Davletshina G.K.1, Grechishnikov V.A.2, Isaev A.V.2, Pivkin P.M.2
-
Affiliations:
- Naberezhnye Chelny Institute
- Stankin Moscow State Technological University
- Issue: Vol 37, No 3 (2017)
- Pages: 266-269
- Section: Article
- URL: https://journals.rcsi.science/1068-798X/article/view/227261
- DOI: https://doi.org/10.3103/S1068798X17030121
- ID: 227261
Cite item
Open Access
Access granted
Subscription Access
Abstract
The precision attained in the shape and mutual position of cylindrical surfaces after machining may be assessed by means of a mathematical model. The effectiveness of the model is confirmed in practice.
About the authors
R. M. Khusainov
Naberezhnye Chelny Institute
Author for correspondence.
Email: rmh@inbox.ru
Russian Federation, Naberezhnye Chelny
S. Yu. Yurasov
Naberezhnye Chelny Institute
Email: rmh@inbox.ru
Russian Federation, Naberezhnye Chelny
R. R. Ziyatdinov
Naberezhnye Chelny Institute
Email: rmh@inbox.ru
Russian Federation, Naberezhnye Chelny
G. K. Davletshina
Naberezhnye Chelny Institute
Email: rmh@inbox.ru
Russian Federation, Naberezhnye Chelny
V. A. Grechishnikov
Stankin Moscow State Technological University
Email: rmh@inbox.ru
Russian Federation, Moscow
A. V. Isaev
Stankin Moscow State Technological University
Email: rmh@inbox.ru
Russian Federation, Moscow
P. M. Pivkin
Stankin Moscow State Technological University
Email: rmh@inbox.ru
Russian Federation, Moscow
Supplementary files
