| Edição |
Título |
Arquivo |
| Volume 38, Nº 6 (2018) |
Ultrasonic Cutting of Polymers |
(Eng)
|
|
Volkov S., Nerovnyi V., Kobernik N.
|
| Volume 38, Nº 6 (2018) |
Mobile System for Restoring the Sealing Surfaces of Pipeline Valves |
(Eng)
|
|
Zaides S., Gaisin S.
|
| Volume 38, Nº 6 (2018) |
Wear and Performance of Hard Alloys |
(Eng)
|
|
Ryzhkin A., Burlakova V., Novikova A.
|
| Volume 38, Nº 6 (2018) |
Dynamic Modeling of an Active Damper |
(Eng)
|
|
Mikhailov V., Bazinenkov A., Dolinin P., Stepanov G.
|
| Volume 38, Nº 6 (2018) |
Correction of Rolling Mill Mechatronic System to Limit Dynamic Loads |
(Eng)
|
|
Malafeev S., Malafeeva A., Konyashin V.
|
| Volume 38, Nº 6 (2018) |
Characteristics of Plunger Pumps |
(Eng)
|
|
Velikanov N., Naumov V., Koryagin S.
|
| Volume 38, Nº 6 (2018) |
Flammability of New Diesel Fuels |
(Eng)
|
|
Kartashevich A., Plotnikov S.
|
| Volume 38, Nº 6 (2018) |
Mechatronic Motorized Spindle with Hydrostatic Bearings and a Piezohydraulic Generator of Resonant Axial Microoscillations |
(Eng)
|
|
Golovin A., Kurzakov A., Shatokhin S.
|
| Volume 38, Nº 6 (2018) |
Theory of Intermittent Cutting. 2. Existing Approaches |
(Eng)
|
|
Bol’shakov A.
|
| Volume 38, Nº 6 (2018) |
Frictional Coefficients between Aluminum–Silicon Alloy and Cutting Inserts with MPCVD Diamond Coatings |
(Eng)
|
|
Ashkinazi E., Ral’chenko V., Konov V., Vinogradov D., Tsygankov P., Dryzhak E., Khomich A.
|
| Volume 38, Nº 6 (2018) |
Assessing the Difficulty and Cost of Research and Development for the Case of Distributed Aviation Systems |
(Eng)
|
|
Ermakova O.
|
| Volume 38, Nº 6 (2018) |
Assessing the Effectiveness of Solid Lubricants |
(Eng)
|
|
Panaioti V., Asadova Y., Nemenko M.
|
| Volume 38, Nº 6 (2018) |
Electrolytic Plasma Surface Polishing of Complex Components Produced by Selective Laser Melting |
(Eng)
|
|
Ablyaz T., Muratov K., Radkevich M., Ushomirskaya L., Zarubin D.
|
| Volume 38, Nº 6 (2018) |
Electromechanical Hardening of VT22 Titanium Alloy in Screw-Cutting Lathes |
(Eng)
|
|
Yakovlev S., Zamal’dinov M., Nuretdinova Y., Mishanin A., Igonin V., Sotnikov M., Khabarova V.
|
| Volume 38, Nº 6 (2018) |
Adjustable Reamer Ensuring Scratch-Free Extraction from the Machined Hole |
(Eng)
|
|
Zheleznov G., Shirokov A.
|
| Volume 38, Nº 6 (2018) |
Superhigh-Speed Electric Motor with Unipolar Magnetic Bearing |
(Eng)
|
|
Ismagilov F., Vavilov V.
|
| Volume 38, Nº 6 (2018) |
Parametric Synthesis of Supply Drives for CNC Metalworking Machines |
(Eng)
|
|
Bushuev V., Molodtsov V., Novikov V.
|
| Volume 38, Nº 6 (2018) |
Economic Efficiency and Hourly Operational Cost of High-Speed Equipment |
(Eng)
|
|
Shmatkov V., Shmatkova A.
|
| Volume 38, Nº 6 (2018) |
Estimating the Effectiveness of Personnel Management at Aviation Enterprises |
(Eng)
|
|
Fedotova M., Tikhonov A., Novikov S.
|
| Volume 38, Nº 5 (2018) |
Disk Profile for the Machining of Helical Channels |
(Eng)
|
|
Korotkikh M., Martsinkevich I.
|
| Volume 38, Nº 5 (2018) |
Limiting State of High-Speed Drills |
(Eng)
|
|
Dreval’ A.
|
| Volume 38, Nº 5 (2018) |
Cutting Force in the Machining of Quenched 40Kh and KhVG Steel by Ceramic Tools |
(Eng)
|
|
Pronin A., Myl’nikov V., Romanov A.
|
| Volume 38, Nº 5 (2018) |
The Theory of Discontinuous Cutting |
(Eng)
|
|
Bol’shakov A.
|
| Volume 38, Nº 5 (2018) |
Markov-Chain Description of Powder-Coating Wear in Slipping Friction |
(Eng)
|
|
Vinokurov G., Starostin E., Popov O.
|
| Volume 38, Nº 5 (2018) |
Synchronizing-Cone Blanks with a Sprayed Steel Coating for Vehicle Transmissions |
(Eng)
|
|
Trukhanov V., Krykhtin Y., Romanovskii A.
|
| 401 - 425 de 991 resultados |
<< < 12 13 14 15 16 17 18 19 20 21 > >>
|
