Enviar artigo por via de e-mail Cutting Force in the Machining of Quenched 40Kh and KhVG Steel by Ceramic Tools
- Autores: Pronin A.I.1, Myl’nikov V.V.2, Romanov A.D.3
-
Afiliações:
- Komsomolsk-on-Amur State Technical University
- Nizhny Novgorod State University of Architecture and Construction
- Alekseev Nizhny Novgorod State Technical University
- Edição: Volume 38, Nº 5 (2018)
- Páginas: 360-362
- Seção: Article
- URL: https://journals.rcsi.science/1068-798X/article/view/227441
- DOI: https://doi.org/10.3103/S1068798X18050143
- ID: 227441
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
The influence of the supply on the cutting force is established in the machining of quenched steel by VOK-60 cutting ceramic. The optimal machining conditions for quenched 40Kh and KhVG steel workpieces are determined.
Palavras-chave
Sobre autores
A. Pronin
Komsomolsk-on-Amur State Technical University
Autor responsável pela correspondência
Email: nil_st@nntu.nnov.ru
Rússia, Komsomolsk-on-Amur
V. Myl’nikov
Nizhny Novgorod State University of Architecture and Construction
Email: nil_st@nntu.nnov.ru
Rússia, Nizhny Novgorod
A. Romanov
Alekseev Nizhny Novgorod State Technical University
Email: nil_st@nntu.nnov.ru
Rússia, Nizhny Novgorod
Arquivos suplementares
