| Issue |
Title |
File |
| Vol 38, No 10 (2018) |
Life of Submersible-Pump Components |
(Eng)
|
|
Akhmedpashaev M.M., Akhmedpashaev M.U., Begov Z.B.
|
| Vol 38, No 10 (2018) |
Two-Channel Capacitive Ignition System with a Transistor Converter for Ground-Based Gas-Turbine Engines |
(Eng)
|
|
Gizatullin F.A., Salikhov R.M., Sitnikov R.P.
|
| Vol 38, No 10 (2018) |
Determining Pipeline Eigenfrequencies on the Basis of the Shock Response of Prefabricated Structures |
(Eng)
|
|
Yakhnenko M.S., Bobarika I.O., Demidov A.I.
|
| Vol 38, No 10 (2018) |
Optimization of the High-Speed Turning of High-Temperature Nickel Alloy |
(Eng)
|
|
Albagachiev A.Y., Krasko A.S., Stramtsova E.S.
|
| Vol 38, No 10 (2018) |
Theory of Intermittent Cutting. 6. Theoretical Aspects of Tool Entry in the Blank |
(Eng)
|
|
Bol’shakov A.N.
|
| Vol 38, No 10 (2018) |
Energy Processes in Complex Systems |
(Eng)
|
|
Vasin S.A., Plakhotnikova E.V.
|
| Vol 38, No 10 (2018) |
Influence of Spindle Wobble in Turning on the Workpiece’s Surface Topology |
(Eng)
|
|
Zakovorotny V.L., Gvindzhiliya V.E.
|
| Vol 38, No 10 (2018) |
Factors Affecting the Surface Roughness in Burnishing |
(Eng)
|
|
Smirnov A.V., Kuznetsov V.A.
|
| Vol 38, No 10 (2018) |
Turning of Discontinuous Surfaces by Cutters with Handles of Different Structure |
(Eng)
|
|
Borodkin N.N., Vasin L.A., Vasin S.A.
|
| Vol 38, No 10 (2018) |
Structure of the Force Field near the Cutter Tip with a Highly Damping Handle |
(Eng)
|
|
Borodkin N.N., Vasin L.A., Vasin S.A.
|
| Vol 38, No 10 (2018) |
Cutters for Machining End Channels |
(Eng)
|
|
Grechishnikov V.A., Pivkin P.M., Isaev A.V., Romanov V.B., Maksimov Y.V.
|
| Vol 38, No 10 (2018) |
Ultrafast Sharpening of a Hard-Alloy Tool |
(Eng)
|
|
Rechenko D.S., Popov A.Y., Babaev A.S., Laptev N.V.
|
| Vol 38, No 10 (2018) |
New Milling-Machine Design |
(Eng)
|
|
Pini B.E., Maksimov Y.V., Popov A.V.
|
| Vol 38, No 9 (2018) |
Dynamic Optimization of Switched-Reluctance Motors |
(Eng)
|
|
Petrushin A.D., Kashuba A.V.
|
| Vol 38, No 9 (2018) |
Dynamics of Synchronous Hydromechanical Drive in Mobile Machine |
(Eng)
|
|
Rybak A.T., Temirkanov A.R., Lyakhnitskaya O.V.
|
| Vol 38, No 9 (2018) |
Diagnostics of Rotary Equipment by Means of Entropic Indices Based on Electrical Signals |
(Eng)
|
|
Chernov A.V., Abidova E.A., Khegai L.S.
|
| Vol 38, No 9 (2018) |
Cutting Methods for Thick Titanium-Alloy Slabs |
(Eng)
|
|
Polyanskii S.N., Butakov S.V., Mal’tsev L.V., Ol’kov I.S., Popov M.A., Aleksandrov V.A.
|
| Vol 38, No 9 (2018) |
Theory of Intermittent Cutting. 5. Description of Tool Entry in the Blank |
(Eng)
|
|
Bol’shakov A.N.
|
| Vol 38, No 9 (2018) |
Electron-Beam Melting in the Manufacture of Gas-Turbine Components |
(Eng)
|
|
Albagachiev A.Y., Krasko A.S., Baranova N.S., Stramtsova E.S., Mokanu A.A.
|
| Vol 38, No 9 (2018) |
Diffusional Boriding of Subeutectoidal Tool Steels: Technology and Outcome |
(Eng)
|
|
Gadalov V.N., Emel’yanov S.G., Filatov E.A., Makarova I.A., Sal’nikov V.G.
|
| Vol 38, No 9 (2018) |
Drone-Based Autonomous Robot Diagnostic System for Gas and Oil Pipelines in the Arctic and Far North |
(Eng)
|
|
Kabaldin Y.G., Shatagin D.A., Kiselev A.V., Zhelonkin M.V., Golovin A.A.
|
| Vol 38, No 9 (2018) |
Assessing the Manufacturability of Product Designs |
(Eng)
|
|
Bazrov B.M.
|
| Vol 38, No 9 (2018) |
Blanks for Bronze-Coated Frictional Disks Used in Vehicle Transmissions |
(Eng)
|
|
Krykhtin Y.I., Karlov V.I.
|
| Vol 38, No 9 (2018) |
Improving the Reliability of Large High-Speed Systems |
(Eng)
|
|
Shalobaev E.V., Demina A.S.
|
| Vol 38, No 9 (2018) |
Robot Positioning in Assembly and Installation |
(Eng)
|
|
Akhatov R.K., Odnokurtsev K.A., Zykova E.V.
|
| 326 - 350 of 991 Items |
<< < 9 10 11 12 13 14 15 16 17 18 > >>
|
