Influence of Vibration on Surface Roughness in Turning

V. F. Bez’’yazychnyi; A. N. Sutyagin

doi:10.3103/S1068798X19070050

Influence of Vibration on Surface Roughness in Turning

Authors: Bez’’yazychnyi V.F.¹, Sutyagin A.N.¹
Affiliations:
1. Solov’ev Rybinsk State Aviation-Engineering University
Issue: Vol 39, No 7 (2019)
Pages: 612-616
Section: Article
URL: https://journals.rcsi.science/1068-798X/article/view/227758
DOI: https://doi.org/10.3103/S1068798X19070050
ID: 227758

Cite item

Full Text

Open Access
Restricted Access

Access granted
Restricted Access

Subscription Access

Abstract
About the authors
References
Supplementary files
Statistics

Abstract

Errors in machining and the relation between the final surface roughness and the vibration of the machining system (the lathe, the attachment, the tool, and the workpiece) are considered, for the case of turning. Software for visualization of surface roughness produced by machining is developed.

Keywords

self-oscillation, surface roughness, surface undulation, product quality, high-speed machining, turning

About the authors

V. F. Bez’’yazychnyi

Solov’ev Rybinsk State Aviation-Engineering University

Author for correspondence.
Email: technology@rsatu.ru
Russian Federation, Rybinsk

A. N. Sutyagin

Solov’ev Rybinsk State Aviation-Engineering University

Email: technology@rsatu.ru
Russian Federation, Rybinsk

Supplementary files

Supplementary Files

Action

1. JATS XML

Download

Username
Password
Remember me

Forgot password?	Register

Username
Password
Remember me

Forgot password?	Register