Forced Vibration of an Annular Cross Section in Combined Cutting and Deformation

Yu. V. Maksimov; A. V. Ankin; E. A. Vetrova; D. I. Obraztsov

doi:10.3103/S1068798X19020059

Forced Vibration of an Annular Cross Section in Combined Cutting and Deformation

Authors: Maksimov Y.V.¹, Ankin A.V.², Vetrova E.A.², Obraztsov D.I.¹
Affiliations:
1. Moscow Polytechnic University
2. Moscow Power-Engineering Institute
Issue: Vol 39, No 2 (2019)
Pages: 174-176
Section: Article
URL: https://journals.rcsi.science/1068-798X/article/view/227655
DOI: https://doi.org/10.3103/S1068798X19020059
ID: 227655

Cite item

Full Text

Open Access
Restricted Access

Access granted
Restricted Access

Subscription Access

Abstract
About the authors
References
Supplementary files
Statistics

Abstract

The shaping process in the combined cutting and deformation of flexible hollow shafts is considered. Deformation of the cross section is taken into account.

Keywords

production system, hollow cylinder, combined cutting and deformation, rod model, cross-sectional oscillation, flexural vibration, machining error

About the authors

Yu. V. Maksimov

Moscow Polytechnic University

Author for correspondence.
Email: yu.v.maksimov@mospolytech.ru
Russian Federation, Moscow

A. V. Ankin

Moscow Power-Engineering Institute

Author for correspondence.
Email: ankin@list.ru
Russian Federation, Moscow

E. A. Vetrova

Moscow Power-Engineering Institute

Author for correspondence.
Email: katusha_i_a@mail.ru
Russian Federation, Moscow

D. I. Obraztsov

Moscow Polytechnic University

Author for correspondence.
Email: dimon3000gt@mail.ru
Russian Federation, Moscow

Supplementary files

Supplementary Files

Action

1. JATS XML

Download

Username
Password
Remember me

Forgot password?	Register

Username
Password
Remember me

Forgot password?	Register