Resultant Cutting Trajectories on Machine Tools with Raster Tool Motion

K. R. Muratov; E. A. Gashev; T. R. Ablyaz; L. D. Sirotenko; E. V. Matygullina; D. M. Lagunov

doi:10.3103/S1068798X18120274

Resultant Cutting Trajectories on Machine Tools with Raster Tool Motion

Authors: Muratov K.R.¹, Gashev E.A.¹, Ablyaz T.R.¹, Sirotenko L.D.¹, Matygullina E.V.¹, Lagunov D.M.¹
Affiliations:
1. Perm National Research Polytechnic University
Issue: Vol 38, No 12 (2018)
Pages: 1071-1073
Section: Article
URL: https://journals.rcsi.science/1068-798X/article/view/227609
DOI: https://doi.org/10.3103/S1068798X18120274
ID: 227609

Cite item

Full Text

Open Access
Restricted Access

Access granted
Restricted Access

Subscription Access

Abstract
About the authors
References
Supplementary files
Statistics

Abstract

The formation of the resultant raster trajectories in machine tools are established on the basis of Lissajous figures, taking account of additional workpiece motion for finishing purposes. Kinematic and geometric formulas are obtained for the relative tool and workpiece trajectory with strict kinematic coupling. These formulas are required in practice for abrasive lapping. They permit control of the resultant abrasive-cutting trajectory in finishing the precision planes of the workpiece.