Email this article Laser Machining of Tool Steels
- Authors: Zvezdin V.V.1, Khisamutdinov R.M.1, Grechishnikov V.A.2, Saubanov R.R.1, Israfilov I.K.1, Portnov S.M.1, Yurasov S.Y.1
-
Affiliations:
- Naberezhnye Chelny Institute, Kazan Federal University
- Stankin Moscow State Technical University
- Issue: Vol 38, No 12 (2018)
- Pages: 1038-1041
- Section: Article
- URL: https://journals.rcsi.science/1068-798X/article/view/227601
- DOI: https://doi.org/10.3103/S1068798X18120213
- ID: 227601
Cite item
Open Access
Access granted
Subscription Access
Abstract
Laser quenching and application of wear-resistant powder to the cutting edge of a hob is considered, with careful positioning of the laser spot. Experimental data are analyzed. The quality of quenching and powder surfacing depends on the machining conditions; the quality of the laser radiation; the energy characteristics of the laser system; and the precision in positioning the laser focus.
About the authors
V. V. Zvezdin
Naberezhnye Chelny Institute, Kazan Federal University
Author for correspondence.
Email: VVZvezdin@kpfu.ru
Russian Federation, Kazan
R. M. Khisamutdinov
Naberezhnye Chelny Institute, Kazan Federal University
Author for correspondence.
Email: RMHisamutdinov@kpfu.ru
Russian Federation, Kazan
V. A. Grechishnikov
Stankin Moscow State Technical University
Author for correspondence.
Email: ittf.stankin@gmail.com
Russian Federation, Moscow
R. R. Saubanov
Naberezhnye Chelny Institute, Kazan Federal University
Author for correspondence.
Email: RRSaubanov@kpfu.ru
Russian Federation, Kazan
I. Kh. Israfilov
Naberezhnye Chelny Institute, Kazan Federal University
Author for correspondence.
Email: irmaris@yandex.ru
Russian Federation, Kazan
S. M. Portnov
Naberezhnye Chelny Institute, Kazan Federal University
Author for correspondence.
Email: SMPortnov@kpfu.ru
Russian Federation, Kazan
S. Yu. Yurasov
Naberezhnye Chelny Institute, Kazan Federal University
Author for correspondence.
Email: docfile@yandex.ru
Russian Federation, Kazan
Supplementary files
