Roughness of Cylindrical Parts in Transverse Burnishing by Flat Plates

S. A. Zaides; Fam Dak Fong

doi:10.3103/S1068798X18120420

Roughness of Cylindrical Parts in Transverse Burnishing by Flat Plates

Authors: Zaides S.A.¹, Fam Dak Fong ¹
Affiliations:
1. Irkutsk National Research Technical University
Issue: Vol 38, No 12 (2018)
Pages: 921-925
Section: Article
URL: https://journals.rcsi.science/1068-798X/article/view/227576
DOI: https://doi.org/10.3103/S1068798X18120420
ID: 227576

Cite item

Full Text

Open Access
Restricted Access

Access granted
Restricted Access

Subscription Access

Abstract
About the authors
References
Supplementary files
Statistics

Abstract

The use of transverse burnishing by means of flat plates for combined finishing and strengthening of cylindrical parts is considered. The influence of the compressive strain and the total number of workpiece rotations on the surface roughness is determined experimentally.

Keywords

strengthening, transverse burnishing, compressive strain, surface roughness, cylinder

About the authors

S. A. Zaides

Irkutsk National Research Technical University

Author for correspondence.
Email: zsa@istu.edu
Russian Federation, Irkutsk

Fam Dak Fong

Irkutsk National Research Technical University

Email: zsa@istu.edu
Russian Federation, Irkutsk

Supplementary files

Supplementary Files

Action

1. JATS XML

Download

Username
Password
Remember me

Forgot password?	Register

Username
Password
Remember me

Forgot password?	Register