Email this article Relation between the tool database and the CAM system in designing operations on a numerically controlled machine tool
- Authors: Grechishnikov V.A.1, Urmanov M.D.2, Khusainov R.M.3, Yurasov S.Y.3, Yurasova O.I.3
-
Affiliations:
- Stankin Moscow State Technical University
- PAO KAMAZ
- Naberezhnye Chelny Institute
- Issue: Vol 37, No 10 (2017)
- Pages: 906-909
- Section: Article
- URL: https://journals.rcsi.science/1068-798X/article/view/227167
- DOI: https://doi.org/10.3103/S1068798X17100082
- ID: 227167
Cite item
Open Access
Access granted
Subscription Access
Abstract
A method is proposed for formulating a tool database with reference to the machine tools and recommended operating conditions at a specific plant. The database may be used to program machining operations in a CAM system.
Keywords
About the authors
V. A. Grechishnikov
Stankin Moscow State Technical University
Author for correspondence.
Email: v.grechishnikov@stankin.ru
Russian Federation, Moscow
M. D. Urmanov
PAO KAMAZ
Email: v.grechishnikov@stankin.ru
Russian Federation, Naberezhnye Chelny
R. M. Khusainov
Naberezhnye Chelny Institute
Email: v.grechishnikov@stankin.ru
Russian Federation, Naberezhnye Chelny
S. Yu. Yurasov
Naberezhnye Chelny Institute
Email: v.grechishnikov@stankin.ru
Russian Federation, Naberezhnye Chelny
O. I. Yurasova
Naberezhnye Chelny Institute
Email: v.grechishnikov@stankin.ru
Russian Federation, Naberezhnye Chelny
Supplementary files
