Enviar artigo por via de e-mail More precise determination of the cutting forces at the tool’s rear surface
- Autores: Popov A.V.1, Dugin A.V.1
-
Afiliações:
- Technical University of Liberec
- Edição: Volume 37, Nº 10 (2017)
- Páginas: 888-891
- Seção: Article
- URL: https://journals.rcsi.science/1068-798X/article/view/227163
- DOI: https://doi.org/10.3103/S1068798X17100161
- ID: 227163
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
Two methods have been proposed for more precise determination of the cutting forces when using tools with different wear at the rear surface: in one, the actual contact is taken into account; in the other (proposed by Zorev), it is ignored. In the present work, these methods are compared.
Palavras-chave
Sobre autores
A. Popov
Technical University of Liberec
Autor responsável pela correspondência
Email: alespopov@yandex.ru
Tchéquia, Liberec
A. Dugin
Technical University of Liberec
Email: alespopov@yandex.ru
Tchéquia, Liberec
Arquivos suplementares
