Enviar artigo por via de e-mail Surface polishing of lithium-niobate single crystals
- Autores: Gashev E.A.1, Muratov K.R.1
-
Afiliações:
- Perm National Research Polytechnic University
- Edição: Volume 36, Nº 11 (2016)
- Páginas: 982-984
- Seção: Article
- URL: https://journals.rcsi.science/1068-798X/article/view/227099
- DOI: https://doi.org/10.3103/S1068798X16110083
- ID: 227099
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
The polishing of a lithium-niobate single crystal is considered. Specifically, the influence of the applied pressure and relative speed on the productivity and the quality of the machined surface is studied. A formula is given for the total depth of the surface layer removed in finishing and the polishing time required for its removal.
Palavras-chave
Sobre autores
E. Gashev
Perm National Research Polytechnic University
Email: Karimur_80@mail.ru
Rússia, Perm
K. Muratov
Perm National Research Polytechnic University
Autor responsável pela correspondência
Email: Karimur_80@mail.ru
Rússia, Perm
Arquivos suplementares
