Email this article Automated Control System for the Assembly of a Composite Punching Tool
- Authors: Valiev A.M.1, Shibakov V.G.1, Pankratov D.L.1
-
Affiliations:
- Naberezhnye Chelny Institute
- Issue: Vol 36, No 2 (2016)
- Pages: 142-145
- Section: Article
- URL: https://journals.rcsi.science/1068-798X/article/view/226110
- DOI: https://doi.org/10.3103/S1068798X16020234
- ID: 226110
Cite item
Open Access
Access granted
Subscription Access
Abstract
An automated system for simulation and control of the assembly of a composite hole-punching tool is developed. It consists of an information system used in preparations for assembly, with decision-making support on the basis of precedents; and modules for simulation and correction of the assembly process.
About the authors
A. M. Valiev
Naberezhnye Chelny Institute
Author for correspondence.
Email: cct-ineka@yandex.ru
Russian Federation, Naberezhnye Chelny
V. G. Shibakov
Naberezhnye Chelny Institute
Email: cct-ineka@yandex.ru
Russian Federation, Naberezhnye Chelny
D. L. Pankratov
Naberezhnye Chelny Institute
Email: cct-ineka@yandex.ru
Russian Federation, Naberezhnye Chelny
Supplementary files
