Отправить статью по E-mail Changes in composition and properties of tool electrode during electrospark alloying with Al–Sn alloy
- Авторы: Yurchenko E.V.1, Yurchenko V.I.1, Yakovets I.V.1, Dikusar A.I.1,2
-
Учреждения:
- Shevchenko Pridnestrovian State University
- Institute of Applied Physics
- Выпуск: Том 52, № 2 (2016)
- Страницы: 157-161
- Раздел: Article
- URL: https://journals.rcsi.science/1068-3755/article/view/229609
- DOI: https://doi.org/10.3103/S1068375516020150
- ID: 229609
Цитировать
Открытый доступ
Доступ предоставлен
Только для подписчиков
Аннотация
It is shown that, during the alloying of the D1 aluminum-based alloy using a tool electrode made of Al–Sn alloy, the surface layer of the electrode becomes enriched in oxides and the elements contained in the cathode material. The presence of the oxides leads to an increase in the electrical resistance of the electrode and to its excessive heating, which reduces the efficiency of alloying; this necessitates the recurrent modification of the working surface of the electrode.
Ключевые слова
Об авторах
E. Yurchenko
Shevchenko Pridnestrovian State University
Email: dikusar@phys.asm.md
Молдавия, ul. 25 Oktyabrya 128, Tiraspol, MD-3300
V. Yurchenko
Shevchenko Pridnestrovian State University
Email: dikusar@phys.asm.md
Молдавия, ul. 25 Oktyabrya 128, Tiraspol, MD-3300
I. Yakovets
Shevchenko Pridnestrovian State University
Email: dikusar@phys.asm.md
Молдавия, ul. 25 Oktyabrya 128, Tiraspol, MD-3300
A. Dikusar
Shevchenko Pridnestrovian State University; Institute of Applied Physics
Автор, ответственный за переписку.
Email: dikusar@phys.asm.md
Молдавия, ul. 25 Oktyabrya 128, Tiraspol, MD-3300; ul. Akademicheskaya 5, Chisinau, MD-2028
Дополнительные файлы
