Influence of the Orientation of a Discharge Channel in Water on the Kinematics of Plate Deflection
- Authors: Kosenkov V.M.1, Kuz’menko V.G.1
- 
							Affiliations: 
							- Institute of Pulse Processes and Technologies
 
- Issue: Vol 54, No 3 (2018)
- Pages: 261-266
- Section: Article
- URL: https://journals.rcsi.science/1068-3755/article/view/230711
- DOI: https://doi.org/10.3103/S1068375518030079
- ID: 230711
Cite item
Abstract
The influence of orientation of a discharge channel in water and the length of a cylindrical discharge chamber on the kinematic characteristics of the maximum deflection of plates during molding into an open ring matrix have been studied experimentally. The optical method is used to measure the deflection of the plate deformed by pressure waves generated by an electric discharge in water. No significant effect of the discharge channel orientation and relative length of the cylindrical discharge chamber on the plate deflection is detected.
About the authors
V. M. Kosenkov
Institute of Pulse Processes and Technologies
							Author for correspondence.
							Email: v.m.kosenkov@gmail.com
				                					                																			                												                	Ukraine, 							Nikolaev, 54018						
V. G. Kuz’menko
Institute of Pulse Processes and Technologies
														Email: v.m.kosenkov@gmail.com
				                					                																			                												                	Ukraine, 							Nikolaev, 54018						
Supplementary files
 
				
			 
					 
						 
						 
						 
						 
				 
  
  
  
  
  Email this article
			Email this article  Open Access
		                                Open Access Access granted
						Access granted Subscription Access
		                                		                                        Subscription Access
		                                					