Formation of thick layer electro-spark coatings for restoring worn-out parts of power hydraulic cylinders


Cite item

Full Text

Open Access Open Access
Restricted Access Access granted
Restricted Access Subscription Access

Abstract

The paper considers the application of a new method of forming thick-layer coatings by the electro-spark deposition for restoring worn-out components operating in conditions of sliding friction, based on the example of powered hydraulic cylinders. For practical usage, the technological capabilities of this method were greatly expanded and the dimensional barrier on the deposition of coatings with a high contact continuity was overcome.

About the authors

S. A. Velichko

Ogarev Mordovia State University; All-Russian Scientific Research Institute of the Repair and Maintenance of Machine-Tractor Stations

Author for correspondence.
Email: Velichko2005@yandex.ru
Russian Federation, Saransk, Republic of Mordovia, 430005; Moscow, 109428

P. V. Senin

Ogarev Mordovia State University

Email: tehnoinvest-vip@mail.ru
Russian Federation, Saransk, Republic of Mordovia, 430005

V. I. Ivanov

Ogarev Mordovia State University; All-Russian Scientific Research Institute of the Repair and Maintenance of Machine-Tractor Stations

Author for correspondence.
Email: tehnoinvest-vip@mail.ru
Russian Federation, Saransk, Republic of Mordovia, 430005; Moscow, 109428

A. V. Martynov

Ogarev Mordovia State University

Email: tehnoinvest-vip@mail.ru
Russian Federation, Saransk, Republic of Mordovia, 430005

P. V. Chumakov

Ogarev Mordovia State University

Email: tehnoinvest-vip@mail.ru
Russian Federation, Saransk, Republic of Mordovia, 430005

Supplementary files

Supplementary Files
Action
1. JATS XML

Copyright (c) 2017 Allerton Press, Inc.