Effect of Diamond Grain Orientation on the Local Conductivity of Laser-Induced Graphitized Surface Layer


如何引用文章

全文:

开放存取 开放存取
受限制的访问 ##reader.subscriptionAccessGranted##
受限制的访问 订阅存取

详细

Graphitized structures are fabricated on a polycrystalline diamond surface using an excimer KrF laser. It is found that the layer grown on the {001} crystallite, has a lower resistance and thickness than that on the {111} surface. A model of the formation of oriented nanocrystalline graphite is proposed to explain the observed effects.

作者简介

M. Komlenok

Prokhorov General Physics Institute

Email: m.a.dezhkina@gmail.com
俄罗斯联邦, ul. Vavilova38, Moscow, 119991

M. Dezhkina

Prokhorov General Physics Institute

编辑信件的主要联系方式.
Email: m.a.dezhkina@gmail.com
俄罗斯联邦, ul. Vavilova38, Moscow, 119991

E. Zavedeev

Prokhorov General Physics Institute

Email: m.a.dezhkina@gmail.com
俄罗斯联邦, ul. Vavilova38, Moscow, 119991

A. Khomich

Kotel’nikov Institute of Radio Engineering and Electronics

Email: m.a.dezhkina@gmail.com
俄罗斯联邦, pl. Vvedenskogo 1, Fryazino, Moscow oblast, 141190

A. Orekhov

National Research Centre “Kurchatov Institute”; Shubnikov Institute of Crystallography of Federal Scientific Research Centre “Crystallography and Photonics”

Email: m.a.dezhkina@gmail.com
俄罗斯联邦, Akademika Kurchatova pl. 1, Moscow, 123182; Leninskii pr. 59, Moscow, 119333

V. Konov

Prokhorov General Physics Institute

Email: m.a.dezhkina@gmail.com
俄罗斯联邦, ul. Vavilova38, Moscow, 119991

补充文件

附件文件
动作
1. JATS XML

版权所有 © Allerton Press, Inc., 2019