Simulation of Pollutant Emissions in a Small-Size GTE Based on the Reactor Network Model
- Authors: Zubrilin I.A.1, Matveev S.G.1, Marrone A.2, Pastrone D.G.2
-
Affiliations:
- Samara National Research University
- Department of Mechanical and Aerospace Engineering (DIMEAS)
- Issue: Vol 45, No 10 (2018)
- Pages: 308-310
- Section: Article
- URL: https://journals.rcsi.science/1068-3356/article/view/228778
- DOI: https://doi.org/10.3103/S1068335618100056
- ID: 228778
Cite item
Abstract
The results of simulation of the NOx and CO formation in a small-sized gas turbine engine are presented. A comparison of the results of CFD calculations with experimental data showed that calculations in standard three-dimensional formulation in combination with partitioning into a network of reactors can be used to simulate NOx and CO formation. When using the JetSurf 2.0 chemical reaction mechanism, satisfactory agreement between calculated and experimental data is achieved with a number of elementary reactors above several hundreds.
Keywords
About the authors
I. A. Zubrilin
Samara National Research University
Author for correspondence.
Email: zubrilin416@mail.ru
Russian Federation, Moskovskoye shosse 34, Samara, 443086
S. G. Matveev
Samara National Research University
Email: zubrilin416@mail.ru
Russian Federation, Moskovskoye shosse 34, Samara, 443086
A. Marrone
Department of Mechanical and Aerospace Engineering (DIMEAS)
Email: zubrilin416@mail.ru
Italy, 24 Corso Duca degli Abruzzi, Torino, 10129
D. G. Pastrone
Department of Mechanical and Aerospace Engineering (DIMEAS)
Email: zubrilin416@mail.ru
Italy, 24 Corso Duca degli Abruzzi, Torino, 10129
Supplementary files
