Influence of melting conditions of aluminum alloys on the properties and quality of castings obtained by lost foam casting

详细

The development of modern foundry production is characterized by a constant increase in requirements for the quality of fabricated casting and rational use of material resources, which determines the search for new technical and process solutions, making it possible to acquire the required properties of cast wares along with resource saving. Herewith, the question of revelation and investigation into the regularities of the influence of thermal-temporal parameters of smelting and pouring of aluminum alloys into the casting mold during the lost foam casting on tightness and mechanical and qualitative characteristics of thin-wall castings remain poorly known and complex for implementation, especially allowing for the performance of resourcesaving measures. In this publication, the influence of process parameters of smelting on the strength, tightness, and content of nonmetallic inclusions in castings of the gas-analyzer case made of AK7 alloy during the lost foam casting is considered. The data set acquired based on the experimental investigations has been subjected to statistical processing. The use of statistic models makes it possible to acquire the results of the influence of the holding time and content of secondary materials in the charge on strength and tightness of mentioned castings. The results of an investigation into the influence of holding the AK7 melt at the overheating temperature of 880–890°С on the content of nonmetallic inclusions in castings show that it can be regulated varying the holding time. This procedure decreases the melt microinhomogeneity and provides the acquisition of numerous castings with a minimal content of nonmetallic inclusions.