| Edição |
Título |
Arquivo |
| Volume 59, Nº 4 (2018) |
A Beneficiation Study on a Low Grade Iron Ore by Gravity and Magnetic Separation |
|
|
Akbari H., Noaparast M., Shafaei S., Hajati A., Aghazadeh S., Akbari H.
|
| Volume 58, Nº 3 (2017) |
A comparative study on physicochemical properties of hydroxyapatite powders derived from natural and synthetic sources |
|
|
Rahavi S., Ghaderi O., Monshi A., Fathi M.
|
| Volume 59, Nº 1 (2018) |
A Novel Developed Grain Refiner (Al–Y–B Master Alloys) Using Yttrium and KBF4 Powders |
|
|
Xu R., Sun Q., Wang Z., Xu Y., Ren W.
|
| Volume 57, Nº 2 (2016) |
A novel process to effectively extract values from a manganese-bearing Au-Ag ore by pretreatment with iron scrap as reductant |
|
|
Song B., Liu S., Dong X., Qiu X., Hu Z.
|
| Volume 58, Nº 6 (2017) |
A Study of Plastic Deformation Behavior of AA1050 Aluminum Alloy during Pure Shear Extrusion with Back Pressure |
|
|
Irani M., Joun M.
|
| Volume 60, Nº 5 (2019) |
Aluminum-Matrix Natural Composite Material Based on the Al–Ca–Ni–La–Fe System |
|
|
Akopyan T., Letyagin N., Samoshina M.
|
| Volume 59, Nº 5 (2018) |
Ammoniacal Dissolution of Polymetallic Alloy Produced from Waste Electroscrap |
|
|
Ewa Rudnik ., Dobosz I., Włoch G.
|
| Volume 60, Nº 1 (2019) |
An Alternative Technique for the Extraction of Valuable Elements from Fly Ash: the Carbochlorination Method |
|
|
Long Wang ., Zhang T., Lv G., Dou Z., Zhang W., Niu L.
|
| Volume 59, Nº 1 (2018) |
An Experimental Investigation on the Copper Recovery from Flotation Tailing Dams by Reflotation |
|
|
Mousavinezhad S., Pourghahramani P., Aghazadeh S.
|
| Volume 57, Nº 3 (2016) |
An increase in fatigue service life of eutectic silumin by electron-beam treatment |
|
|
Ivanov Y., Aksenova K., Gromov V., Konovalov S., Petrikova E.
|
| Volume 60, Nº 6 (2019) |
An Increase in Process Characteristics of Flotation of Low-Grade Fine-Disseminated Scheelite Ores |
|
|
Ignatkina V., Shepeta E., Samatova L., Bocharov V.
|
| Volume 58, Nº 5 (2017) |
An increase in purity of ammonium perrhenate solutions with respect to molybdenum(IV) with the sorption recovery of rhenium(VII) from Mo-containing solutions |
|
|
Maltseva E., Blokhin A., Murashkin Y., Mikhaylenko M.
|
| Volume 60, Nº 2 (2019) |
Analysis of the Scheme of Nonequal Channel Angular Pressing as Applied to the Formation of Sheet Magnesium in a Cold State |
|
|
Loginov Y., Volkov A., Kamenetskiy B.
|
| Volume 58, Nº 4 (2017) |
Anisotropy of mechanical properties of products manufactured using selective laser melting of powdered materials |
|
|
Popovich A., Sufiiarov V., Borisov E., Polozov I., Masaylo D., Grigoriev A.
|
| Volume 58, Nº 1 (2017) |
Application of combined casting–pressing for the fabrication of aluminum wire for soldering waveguides |
|
|
Gorokhov Y., Belyaev S., Uskov I., Konstantinov I., Gubanov I., Gorokhova T., Hramtsov P.
|
| Volume 57, Nº 3 (2016) |
Application of high-current pulsed electron beams for modifying the surface of gas-turbine engine blades |
|
|
Shulov V., Gromov A., Teryaev D., Engel’ko V.
|
| Volume 58, Nº 3 (2017) |
Application of immiscible magnetic liquids of different densities as the separation medium for magnetic liquid separation |
|
|
Evdokimov V., Evdokimov S.
|
| Volume 57, Nº 7 (2016) |
Application of PAP-2 aluminum powder to produce powdered composite materials: The features of technology, structure, and physicomechanical properties of composites. Part I. Process approaches providing the formation of composite materials and applied procedures for determining their physicomechanical properties |
|
|
Ivanov D., Sitnikov A., Ivanov A., Shlyapin S.
|
| Volume 60, Nº 6 (2019) |
Application of Polarization Measurements for the Calculation of the Current Efficiency |
|
|
Rudoy V., Ostanin N., Ostanina T., Darintseva A., Nikitin V., Cherepanova A.
|
| Volume 60, Nº 1 (2019) |
Application of Recycling Products of Aluminum Slags in Investment Casting Technology |
|
|
Nikitin K., Sokolov A., Nikitin V., D’yachkov V.
|
| Volume 57, Nº 2 (2016) |
Application of SHS processes for in situ preparation of alumomatrix composite materials discretely reinforced by nanodimensional titanium carbide particles (Review) |
|
|
Amosov A., Luts A., Latukhin E., Ermoshkin A.
|
| Volume 60, Nº 5 (2019) |
Applying SHS for the Fabrication of the Ti3SiC2–Ni Composite |
|
|
Amosov A., Latukhin E., Ryabov A.
|
| Volume 60, Nº 4 (2019) |
Arsenic Removal from Cu–As-Containing Filter Cakes by Na2CO3 Leaching |
|
|
Jian-Hui Wu ., Zhang X., Dong B., Wu J., Chen X., Chen S.
|
| Volume 58, Nº 4 (2017) |
Beneficiation of antimony oxide ore: A review |
|
|
Qin X., Deng J., Lai H., Zhang X.
|
| Volume 58, Nº 3 (2017) |
Boriding of titanium OT4 from powder saturating media |
|
|
Ivanov S., Guriev M., Loginova M., Deev V., Guriev A.
|
| 1 - 25 de 386 resultados |
1 2 3 4 5 6 7 8 9 10 > >> |
