Enviar artigo por via de e-mail Dynamic Strength of Ni3Al Alloy Plates Under Shock Loads
- Autores: Lipatnikova Y.D.1, Belov N.N.1,2, Yugov N.T.1,2, Starenchenko V.A.1
-
Afiliações:
- Tomsk State University of Architecture and Building
- Research Institute of Applied Mechanics and Mathematics at the Tomsk State University
- Edição: Volume 61, Nº 5 (2018)
- Páginas: 955-961
- Seção: Article
- URL: https://journals.rcsi.science/1064-8887/article/view/240575
- DOI: https://doi.org/10.1007/s11182-018-1483-6
- ID: 240575
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
The paper presents a theoretical research of the shock-induced deformation and fracture of Ni3Al alloy specimens depending on the type of its stress-strain curves. The modeling of deformation is based on a combination of the approaches of continuum mechanics and dislocation kinetics. The complex model is numerically implemented in a software system RANET-3.
Palavras-chave
Sobre autores
Ya. Lipatnikova
Tomsk State University of Architecture and Building
Autor responsável pela correspondência
Email: yanna_lip@mail.ru
Rússia, Tomsk
N. Belov
Tomsk State University of Architecture and Building; Research Institute of Applied Mechanics and Mathematics at the Tomsk State University
Email: yanna_lip@mail.ru
Rússia, Tomsk; Tomsk
N. Yugov
Tomsk State University of Architecture and Building; Research Institute of Applied Mechanics and Mathematics at the Tomsk State University
Email: yanna_lip@mail.ru
Rússia, Tomsk; Tomsk
V. Starenchenko
Tomsk State University of Architecture and Building
Email: yanna_lip@mail.ru
Rússia, Tomsk
Arquivos suplementares
