Email this article Dynamic Strength of Ni3Al Alloy Plates Under Shock Loads
- Authors: Lipatnikova Y.D.1, Belov N.N.1,2, Yugov N.T.1,2, Starenchenko V.A.1
-
Affiliations:
- Tomsk State University of Architecture and Building
- Research Institute of Applied Mechanics and Mathematics at the Tomsk State University
- Issue: Vol 61, No 5 (2018)
- Pages: 955-961
- Section: Article
- URL: https://journals.rcsi.science/1064-8887/article/view/240575
- DOI: https://doi.org/10.1007/s11182-018-1483-6
- ID: 240575
Cite item
Open Access
Access granted
Subscription Access
Abstract
The paper presents a theoretical research of the shock-induced deformation and fracture of Ni3Al alloy specimens depending on the type of its stress-strain curves. The modeling of deformation is based on a combination of the approaches of continuum mechanics and dislocation kinetics. The complex model is numerically implemented in a software system RANET-3.
About the authors
Ya. D. Lipatnikova
Tomsk State University of Architecture and Building
Author for correspondence.
Email: yanna_lip@mail.ru
Russian Federation, Tomsk
N. N. Belov
Tomsk State University of Architecture and Building; Research Institute of Applied Mechanics and Mathematics at the Tomsk State University
Email: yanna_lip@mail.ru
Russian Federation, Tomsk; Tomsk
N. T. Yugov
Tomsk State University of Architecture and Building; Research Institute of Applied Mechanics and Mathematics at the Tomsk State University
Email: yanna_lip@mail.ru
Russian Federation, Tomsk; Tomsk
V. A. Starenchenko
Tomsk State University of Architecture and Building
Email: yanna_lip@mail.ru
Russian Federation, Tomsk
Supplementary files
