The Synthesis of Ni–Al Surface Alloy by Low-Energy, High-Current Electron Beam Irradiation of Composite Coating


Citar

Texto integral

Acesso aberto Acesso aberto
Acesso é fechado Acesso está concedido
Acesso é fechado Somente assinantes

Resumo

The paper presents research results of the synthesis of Ni–Al surface alloy performed in a single vacuum cycle via magnetron sputtering of Ni (0.5 μm)–Al (1.5 μm)–Ni (0.5 μm) composite coating onto a steel substrate and its successive single pulse irradiation with low-energy, high-current electron beam (LEHCEB) of a microsecond duration. The numerical solution of the heat equation is used to determine the optimum LEHCEB modes which provide melting of all the films deposited. It is shown that the single pulse irradiation of thin films leads to the formation of the surface alloy consisting mainly of high-melting-point NiAl intermetallic phase. The structure of the surface alloy is a 2 μm thick homogeneous coating with 2×4 μm globules beneath separated by a thin layer of the substrate material. It is found that the wear resistance of the obtained Ni–Al surface layer is 2.7 times higher than that of the untreated steel substrate.

Sobre autores

A. Markov

Tomsk Scientific Center of the Siberian Branch of the Russian Academy of Sciences

Autor responsável pela correspondência
Email: almar@lve.hcei.tsc.ru
Rússia, Tomsk

E. Yakovlev

Tomsk Scientific Center of the Siberian Branch of the Russian Academy of Sciences

Email: almar@lve.hcei.tsc.ru
Rússia, Tomsk

D. Shepel’

Tomsk Scientific Center of the Siberian Branch of the Russian Academy of Sciences

Email: almar@lve.hcei.tsc.ru
Rússia, Tomsk

A. Solov’ev

Tomsk Scientific Center of the Siberian Branch of the Russian Academy of Sciences

Email: almar@lve.hcei.tsc.ru
Rússia, Tomsk

V. Petrov

Tomsk Scientific Center of the Siberian Branch of the Russian Academy of Sciences

Email: almar@lve.hcei.tsc.ru
Rússia, Tomsk

Arquivos suplementares

Arquivos suplementares
Ação
1. JATS XML

Declaração de direitos autorais © Springer Science+Business Media, LLC, part of Springer Nature, 2019