Supervisory control method for redundant technical systems
- Authors: Ageev A.M.1, Bronnikov A.M.2, Bukov V.N.3, Gamayunov I.F.1
-
Affiliations:
- Air Force Engineering Academy
- Bauman Moscow State Technical University
- OAO International Aero Navigation Systems Concern
- Issue: Vol 56, No 3 (2017)
- Pages: 410-419
- Section: Systems Analysis and Operations Research
- URL: https://journals.rcsi.science/1064-2307/article/view/219889
- DOI: https://doi.org/10.1134/S1064230717030029
- ID: 219889
Cite item
Abstract
The redundant equipment system configuration control problem is considered. The proposed method is based on the use of software and hardware, called supervisors, the number of which corresponds to the number of possible configurations. Each supervisor monitors its system configuration with the determination of its readiness index. Then, the preferred configuration is selected and implemented by performance indicators based on arbitration between supervisors with positive readiness indices. An example of redundancy control in a simplified aircraft navigation system is presented.
About the authors
A. M. Ageev
Air Force Engineering Academy
Email: v_bukov@mail.ru
Russian Federation, Voronezh
A. M. Bronnikov
Bauman Moscow State Technical University
Email: v_bukov@mail.ru
Russian Federation, Moscow
V. N. Bukov
OAO International Aero Navigation Systems Concern
Author for correspondence.
Email: v_bukov@mail.ru
Russian Federation, Moscow
I. F. Gamayunov
Air Force Engineering Academy
Email: v_bukov@mail.ru
Russian Federation, Voronezh