Analysis of the Structure of Multilayer Nanocrystalline Coatings Based on Plasma Mass Transfer Parameters Calculated by the Monte Carlo Method


Citar

Texto integral

Acesso aberto Acesso aberto
Acesso é fechado Acesso está concedido
Acesso é fechado Somente assinantes

Resumo

The results of the simulation of plasma fluxes onto the surface of rotating substrates during the combustion of a vacuum arc of the Cr–Ti–Mo cathode system are presented. The structure and composition of the arc-PVD Ti0.15Cr0.74Mo0.11N0.84 coatings are experimentally studied. The numerical simulation results of the coating structures based on experimental data were analyzed. The possibility of the simulation of the structure of multilayer, multicomponent coatings and the concentration distribution of chemical elements and its components is shown by calculating the plasma fluxes using the Monte Carlo method.

Sobre autores

A. Chernogor

National University of Science and Technology MISIS (Moscow Institute of Steel andf Alloys)

Autor responsável pela correspondência
Email: avchernogor@gmail.com
Rússia, Moscow

I. Blinkov

National University of Science and Technology MISIS (Moscow Institute of Steel andf Alloys)

Email: avchernogor@gmail.com
Rússia, Moscow

D. Belov

National University of Science and Technology MISIS (Moscow Institute of Steel andf Alloys)

Email: avchernogor@gmail.com
Rússia, Moscow

V. Sergevnin

National University of Science and Technology MISIS (Moscow Institute of Steel andf Alloys)

Email: avchernogor@gmail.com
Rússia, Moscow

A. Volkhonskii

National University of Science and Technology MISIS (Moscow Institute of Steel andf Alloys)

Email: avchernogor@gmail.com
Rússia, Moscow


Declaração de direitos autorais © Pleiades Publishing, Ltd., 2019

Este site utiliza cookies

Ao continuar usando nosso site, você concorda com o procedimento de cookies que mantêm o site funcionando normalmente.

Informação sobre cookies