Email this article The Influence of Powder Ferritization Technology on the Degree of Magnetic Texture in Plates of BaFe12O19 and SrFe12O19 Hexaferrites
- Authors: Timofeev A.V.1, Kostishin V.G.1, Chitanov D.N.1
-
Affiliations:
- National Research Technological University MISiS (Moscow Institute of Steel and Alloys)
- Issue: Vol 45, No 4 (2019)
- Pages: 401-403
- Section: Article
- URL: https://journals.rcsi.science/1063-7850/article/view/208288
- DOI: https://doi.org/10.1134/S106378501904031X
- ID: 208288
Cite item
Open Access
Access granted
Subscription Access
Abstract
We have studied the influence of a technology used for ferritization of the powders of barium and strontium hexaferrites on the degree of magnetic texture in pressed plates based on these powders. It is established that, in comparison to the traditional ceramic technology, the use of a chemical deposition method allows hexaferrite plates with a 19–22% higher degree of magnetic texture to be obtained by pressing raw blanks at the same values of magnetic field.
About the authors
A. V. Timofeev
National Research Technological University MISiS (Moscow Institute of Steel and Alloys)
Author for correspondence.
Email: andtim2011@gmail.com
Russian Federation, Moscow, 119049
V. G. Kostishin
National Research Technological University MISiS (Moscow Institute of Steel and Alloys)
Email: andtim2011@gmail.com
Russian Federation, Moscow, 119049
D. N. Chitanov
National Research Technological University MISiS (Moscow Institute of Steel and Alloys)
Email: andtim2011@gmail.com
Russian Federation, Moscow, 119049
