Email this article Strength Properties of Aluminum-Oxide Ceramics Prepared by the Additive Manufacturing Method under Shock-Wave Loading
- Authors: Promakhov V.V.1, Savinykh A.S.1,2, Dubkova Y.A.1, Schulz N.A.1, Grunt N.V.1, Razorenov S.V.1,2
-
Affiliations:
- National Research Tomsk State University
- Institute of Problems of Chemical Physics
- Issue: Vol 44, No 10 (2018)
- Pages: 898-901
- Section: Article
- URL: https://journals.rcsi.science/1063-7850/article/view/207979
- DOI: https://doi.org/10.1134/S1063785018100127
- ID: 207979
Cite item
Open Access
Access granted
Subscription Access
Abstract
Aluminum-oxide ceramic samples have been prepared by additive manufacturing with subsequent sintering. The Hugoniot elastic limit and spall strength of the ceramics are determined by analyzing the full wave profiles of the samples recorded using a laser interferometer upon their shock compression with amplitudes of 6.8 and 13.8 GPa.
About the authors
V. V. Promakhov
National Research Tomsk State University
Author for correspondence.
Email: vvpromakhov@mail.ru
Russian Federation, Tomsk, 634050
A. S. Savinykh
National Research Tomsk State University; Institute of Problems of Chemical Physics
Email: vvpromakhov@mail.ru
Russian Federation, Tomsk, 634050; Chernogolovka, Moscow oblast, 142432
Ya. A. Dubkova
National Research Tomsk State University
Email: vvpromakhov@mail.ru
Russian Federation, Tomsk, 634050
N. A. Schulz
National Research Tomsk State University
Email: vvpromakhov@mail.ru
Russian Federation, Tomsk, 634050
N. V. Grunt
National Research Tomsk State University
Email: vvpromakhov@mail.ru
Russian Federation, Tomsk, 634050
S. V. Razorenov
National Research Tomsk State University; Institute of Problems of Chemical Physics
Email: vvpromakhov@mail.ru
Russian Federation, Tomsk, 634050; Chernogolovka, Moscow oblast, 142432
Supplementary files
