A Neutron Testing Facility to Study the Radiation Hardness of the Electronic Components at the SC-1000 Synchrocyclotron of National Research Center Kurchatov Institute—Petersburg Nuclear Physics Institute

The article presents a description of the ISNP/GNEIS testing facility with a neutron spectrum that reproduces the spectrum of atmospheric neutron radiation. The facility was developed at the Petersburg Nuclear Physics Institute (PNPI) of the National Research Center Kurchatov Institute in collaboration with the Institute of Space Device Engineering, a branch of JSC (Joint Stock Company) United Rocket and Space Corporation. The spallation neutron source of the facility is based on the 1-GeV SC-1000 proton synchrocyclotron at the PNPI. The internal neutron-production lead target produces 10-ns pulses of neutrons with a repetition rate of 45–50 Hz and an average neutron intensity of 3 × 10¹⁴ n/s (in the 4σ solid angle). In the irradiation area located at a distance of 36 m from the neutron source, a high-quality collimated neutron beam with a broad energy spectrum of 1–1000 MeV and a neutron flux of 4 × 10⁵ n/(cm² s) allows conducting accelerated single-event soft error testing of electronic components. In the course of the irradiation, the neutron energy spectrum and intensity and the spatial profile of the beam are controlled using a fission ionization chamber (beam monitor) and a position-sensitive multiwire proportional counter (beam profile meter). The data acquisition system of the ISNP/GNEIS facility utilizes 250 MS/s 12 bit CAEN waveform digitizers for the processing of signals from the monitor and profile meter by the neutron time-of-flight technique. In the report, parameters of the ISNP/GNEIS testing facility are discussed in comparison with analogous world-class facilities, as well as requirements and recommendations of the standards used in this field.