Email this article Effect of Laser Annealing on Parameters of Hardened Zones and Their Tribological Properties
- Authors: Biryukov V.P.1, Isakov V.V.2, Fedotov A.Y.2, Baulin D.A.2
-
Affiliations:
- Blagonravov Mechanical Engineering Research Institute
- Baranov Central Institute of Aviation Motors
- Issue: Vol 82, No 11 (2019)
- Pages: 1445-1449
- Section: Promising Construction Materials
- URL: https://journals.rcsi.science/1063-7788/article/view/195843
- DOI: https://doi.org/10.1134/S1063778819110012
- ID: 195843
Cite item
Open Access
Access granted
Subscription Access
Abstract
Metallographic studies of hardened zones of steel 40Kh were carried out. Regression equations were obtained and the surface depth and width of the hardened zones as functions of the beam scanning speed and radiation power at different beam defocusing were plotted with the help of a full factorial experiment. Comparative wear tests showed that, with increasing hardening area to 100% of the friction surface, the wear resistance increases by a factor of 4.47 as compared to normalized steel.
Keywords
About the authors
V. P. Biryukov
Blagonravov Mechanical Engineering Research Institute
Author for correspondence.
Email: laser-52@yandex.ru
Russian Federation, Moscow, 101990
V. V. Isakov
Baranov Central Institute of Aviation Motors
Email: laser-52@yandex.ru
Russian Federation, Moscow, 111116
A. Y. Fedotov
Baranov Central Institute of Aviation Motors
Email: laser-52@yandex.ru
Russian Federation, Moscow, 111116
D. A. Baulin
Baranov Central Institute of Aviation Motors
Email: laser-52@yandex.ru
Russian Federation, Moscow, 111116
Supplementary files
