| Edição |
Título |
Arquivo |
| Volume 41, Nº 2 (2019) |
A Molecular Dynamics Based Comparison of the Mechanical Properties of Three Polytypes of Cubic BC3 |
|
|
Kishor E., Swaminathan N.
|
| Volume 40, Nº 1 (2018) |
A New Phenomenon in the Structure Formation of T5K10 Hard Alloy |
|
|
Prokopiv M.
|
| Volume 40, Nº 3 (2018) |
A Potential Superhard Material m-BCN |
|
|
Shi R., Wang D., Gan L.
|
| Volume 38, Nº 4 (2016) |
A strain state in synthetic diamond crystals by the data of electron backscatter diffraction method |
|
|
Fodchuk I., Borcha M., Khomenko V., Balovsyak S., Tkach V., Statsenko O.
|
| Volume 38, Nº 4 (2016) |
A study of defects and impurities in doped detonation nanodiamonds by EPR, Raman scattering, and XRD methods |
|
|
Dolmatov V., Lapchuk N., Lapchuk T., Nguyen B., Myllymäki V., Vehanen A., Yakovlev R.
|
| Volume 40, Nº 1 (2018) |
A Study of the Influence of Natural Diamond Ultrafine Powders on the Properties of Metal Matrix Composites |
|
|
Safonova M., Syromyatnikova A., Petasyuk G., Fedotov A., Tarasov P., Kim V.
|
| Volume 40, Nº 3 (2018) |
A Study of the Influence of Phase Composition of Cutting Inserts Made of Diamond–Tungsten Carbide Nanocomposite on the Process of Finish Turning of Aluminum Alloys and Brass |
|
|
Stakhniv N., Devin L., Bochechka A., Osadchii A., Nazarchuk S., Rychev S.
|
| Volume 40, Nº 4 (2018) |
A Study of the Potential of Improving Performance of AS20 Diamond Powders Through Altering Their Dimensional and Physico-Chemical Characteristics |
|
|
Lavrinenko V., Ilnitskaya G., Petasyuk G., Ishchenko E., Gaidai S., Pasichnyi O., Skryabin V., Shatokhin V., Zaitseva I., Kuz’menko E., Timoshenko V.
|
| Volume 41, Nº 3 (2019) |
A Study of the Process of Gold Plating from Citrate and Phosphate Electrolytes in the Presence of Modified Detonation Nanodiamonds |
|
|
Dolmatov V., Rudenko D., Burkat G., Aleksandrova A., Vul’ A., Aleksenskii A., Kozlov A., Myllymäki V., Vehanen A., D’yakov I., Dorokhov A., Kiselev M.
|
| Volume 40, Nº 6 (2018) |
A Study of the Tendency and Extent of Variation of Morphometric Characteristics of Standard Synthetic Diamond Grits in a Continuous Series of Their Grades and Sizes |
|
|
Petasyuk G., Lavrinenko V., Sirota Y., Muzichka D.
|
| Volume 38, Nº 4 (2016) |
A system–analogue method of identification of geometric shape of the abrasive grain projection |
|
|
Petasyuk G.
|
| Volume 38, Nº 1 (2016) |
Abrasive cutting factor as a characteristic reflecting the performance parameters of superabrasive grinding |
|
|
Lavrinenko V.
|
| Volume 39, Nº 2 (2017) |
Activity of carbon-fiber-supported Fe–Co catalysts in the CO2 methanation reaction |
|
|
Gaidai S., Gryn’ko V., Zhludenko M., Dyachenko A., Tkach V., Ishchenko O.
|
| Volume 39, Nº 6 (2017) |
Adsorption properties of shungite in purification of water–alcohol solutions |
|
|
Mel’nik L., Tkachuk N., Turchun O., Diyuk V., Ischenko O., Byeda O., Kisterska L., Loginova O., Lysovenko S., Gontar O., Garashchenko V.
|
| Volume 38, Nº 1 (2016) |
An experimental study of the influence of tool material and fine turning conditions on the level of acoustic emission signals |
|
|
Devin L., Rychev S.
|
| Volume 38, Nº 3 (2016) |
Analysis of direct transformation from graphite to diamond crystal |
|
|
Tian B., Xu B., Xu Y.
|
| Volume 38, Nº 5 (2016) |
Assessment of applicability of explosive charges for synthesis of detonation nanodiamonds |
|
|
Dolmatov V.
|
| Volume 39, Nº 6 (2017) |
Attenuation of microwave radiation at 34.09–34.19 GHz in a composite material based on diamond micron powder structured by a nanocarbon binder vapor-deposited at subatmospheric pressure |
|
|
Chasnyk V., Poltoratskiy V., Leshchenko O.
|
| Volume 39, Nº 3 (2017) |
Calculation of the temperature distribution at the HPHT growing of diamond single crystals in cells with two growth layers |
|
|
Burchenia A., Lysakovs’kii V., Gordeyev S., Ivakhnenko S., Kutsai A., Suprun O.
|
| Volume 39, Nº 3 (2017) |
Characterization of tool wear when machining alloy 718 with high-pressure cooling using conventional and surface-modified WC–Co tools |
|
|
Hoier P., Klement U., Tamil Alagan N., Beno T., Wretland A.
|
| Volume 40, Nº 6 (2018) |
Chemical Synthesis of Niobium Diboride Nanosheets by a Solid-State Reaction Route |
|
|
Wang L., Shen Q., Qin H., Zhao D., Liu W., Sun J., Zhu B., Zhou Q.
|
| Volume 38, Nº 3 (2016) |
Composite materials of diamond–(Co–Cu–Sn) system with improved mechanical characteristics. Part 2. The influence of CrB2 additive on the structure and properties of diamond–(Co–Cu–Sn) composite |
|
|
Novikov M., Mechnik V., Bondarenko M., Nesterenko Y., Lyashenko B., Kuzin M.
|
| Volume 38, Nº 1 (2016) |
Composites of the cBN–Si3N4 system reinforced by SiCw for turning tools |
|
|
Osipov A., Klimczyk P., Cygan S., Melniichuk I., Petrusha I., Jaworska L.
|
| Volume 39, Nº 4 (2017) |
Correlation between edge radius of the cBN cutting tool and surface quality in hard turning |
|
|
Zhao T., Agmell M., Persson J., Bushlya V., Ståhl J., Zhou J.
|
| Volume 41, Nº 5 (2019) |
Corrosion Behavior of WC–10 wt % Ni3Al Composite in Acidic Media |
|
|
Li X., Zhang M., Xia X., Cao T., Liang L., Li H.
|
| 1 - 25 de 225 resultados |
1 2 3 4 5 6 7 8 9 > >> |
