| 期 |
标题 |
文件 |
| 卷 40, 编号 3 (2018) |
Corrosion Resistance of the Hot-Pressed B4C–VC Ceramic System |
|
|
Kaidash O., Turkevich V., Marinich M., Fesenko I., Belovol V., Tkach V.
|
| 卷 41, 编号 1 (2019) |
Criterion-Based Assessment of Performance Improvement for Aircraft Structural Parts with Thermal Spray Coatings |
|
|
Bychkov A., Kondratiev A.
|
| 卷 39, 编号 6 (2017) |
Critical comments to the Oliver–Pharr measurement technique of hardness and elastic modulus by instrumented indentations and refinement of its basic relations |
|
|
Galanov B., Dub S.
|
| 卷 40, 编号 5 (2018) |
Current Advances in the Development of Abrasive Tools and Investigation of Diamond Abrasive Machining Processes (Materials Science Approach). Review |
|
|
Lavrinenko V.
|
| 卷 38, 编号 5 (2016) |
Cutting of polycrystalline superhard materials by jet methods |
|
|
Salenko A., Shchetinin V., Gabuzyan G., Nikitin V., Novikov N., Klimenko S.
|
| 卷 41, 编号 6 (2019) |
Cyclic Twins of CVD Diamond Crystals |
|
|
Kvasnytsya V., Kvasnytsia I.
|
| 卷 39, 编号 2 (2017) |
Defect-and-impurity state of diamond single crystals grown in the Fe–Mg–Al–C system |
|
|
Kovalenko T., Ivakhnenko S., Lysakovsky V., Gordeev S., Burchenya A.
|
| 卷 38, 编号 6 (2016) |
Defect-and-impurity state of type Ib diamond single crystals of cubic habit |
|
|
Suprun E., Kalenchuk V., Ivakhnenko S., Kutsai A., Lysakovskii V., Zanevskii O., Dufu V., Shenlin’ V.
|
| 卷 41, 编号 5 (2019) |
Dependence of the Detonation Nanodiamond Yield on the Detonation Process Parameters |
|
|
Dolmatov V., Myllymäki V., Vehanen A., Dorokhov A., Kiselev M.
|
| 卷 41, 编号 2 (2019) |
Deposition and Characterization of Thin Si-B-C-N Films by DC Reactive Magnetron Sputtering of Composed Si/B4C Target |
|
|
Onoprienko A., Ivashchenko V., Kozak A., Sinelnichenko A., Tomila T.
|
| 卷 39, 编号 3 (2017) |
Determination of grinding conditions for renewal of a wheel cutting ability allowing for its variation during the machining process |
|
|
Matyukha P., Poltavets V.
|
| 卷 39, 编号 5 (2017) |
Detonation nanodiamonds as antioxidants in various test systems |
|
|
Shugalei I., Borovikova A., Voznyakovskii A., Ilyushin M.
|
| 卷 39, 编号 2 (2017) |
Diamond electroplated coating with protection by diamond micron powder in a dressing tool. Part 1. Coating deposition conditions |
|
|
Sheiko M., Skok V.
|
| 卷 39, 编号 6 (2017) |
Diamond polishing of crystalline materials for optoelectronics |
|
|
Filatov Y.
|
| 卷 40, 编号 1 (2018) |
Drilling of Composites Using Tools of Polycrystalline Superhard Materials |
|
|
Devin L., Grechuk A., Lupkin B.
|
| 卷 41, 编号 4 (2019) |
Effect of Different Binder Phases on the Σ2 Grain Boundary Plane Distribution in Cemented Carbides |
|
|
Yuan X.
|
| 卷 41, 编号 4 (2019) |
Effect of Graphite Addition on Impregnated Diamond Bit Properties |
|
|
Xie L., Chen L., Huang X.
|
| 卷 38, 编号 2 (2016) |
Effect of metal impurities on the oxidation of various carbon forms in products of detonation diamond synthesis |
|
|
Panova A., Bogatyreva G., Zabuga V., Tsapyuk G., Serga M., Byeda O.
|
| 卷 40, 编号 1 (2018) |
Effect of the Additive of Y2O3 on the Structure Formation and Properties of Composite Materials Based on AlN–SiC |
|
|
Serbenyuk T., Prikhna T., Sverdun V., Sverdun N., Moshchil’ V., Ostash O., Vasyliv B., Podhurska V., Kovylyaev V., Chasnyk V.
|
| 卷 38, 编号 2 (2016) |
Effect of the deposition parameters on the phase–structure state, hardness, and tribological characteristics of Mo2N/CrN vacuum–arc multilayer coatings |
|
|
Beresnev V., Klimenko S., Sobol’ O., Grankin S., Stolbovoi V., Turbin P., Novikov V., Meilekhov A., Litovchenko S., Malikova L.
|
| 卷 38, 编号 6 (2016) |
Effect of the high doze of N+(1018 cm–2) ions implantation into the (TiHfZrVNbTa)N nanostructured coating on its microstructure, elemental and phase compositions, and physico-mechanical properties |
|
|
Pogrebnjak A., Bor’ba S., Kravchenko Y., Tleukenov E., Plotnikov C., Beresnev V., Takeda Y., Oyoshi K., Kupchishin A.
|
| 卷 38, 编号 3 (2016) |
Effect of the rate of cooling tungsten heavy alloys of the W–Ni–Fe type from the sintering temperature on the formation of their physico-mechanical properties |
|
|
Andreiev I.
|
| 卷 38, 编号 1 (2016) |
Effect of tungsten on the oxidation kinetics of diamond nanopowder |
|
|
Zabuga V., Bochechka O., Tsapyuk G., Kurylyak T., Fedorchuk O.
|
| 卷 40, 编号 3 (2018) |
Electroarc Synthesis and Cleaning from Carbon Impurities of Cubic Silicon Carbide in the Air Atmosphere |
|
|
Pak A., Rudmin M., Mamontov G., Bolotnikova O.
|
| 卷 39, 编号 3 (2017) |
Electrodeposited diamond coating with protection by diamond micron powder in a dressing tool. Part 2. Tool performance |
|
|
Sheiko M., Maksimenko A., Bologov P.
|
| 26 - 50 的 225 信息 |
<< < 1 2 3 4 5 6 7 8 9 > >> |
