Enviar artigo por via de e-mail The Influence of Debris Solids on the Ground Surface Roughness and the Assessment of the Surface Scratching Probability
- Autores: Lavrinenko V.I.1, Molchanov V.F.2, Solod V.Y.2, Prots L.A.3
-
Afiliações:
- Bakul Institute for Superhard Materials
- Dniprovsk State Technical University
- Institute of Electron Physics
- Edição: Volume 41, Nº 6 (2019)
- Páginas: 441-448
- Seção: Investigation of Machining Processes
- URL: https://journals.rcsi.science/1063-4576/article/view/186674
- DOI: https://doi.org/10.3103/S106345761906008X
- ID: 186674
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
The paper addresses the influence of grinding debris solid particles on the formation of a machined surface roughness, which is reflected on the parameter Rmax. A special feature of the dependence of the surface roughness ratio Rmax/Ra on the grinding cost parameters has been revealed. The probability of scratch formation on the workpiece surface in grinding has been theoretically assessed.
Palavras-chave
Sobre autores
V. Lavrinenko
Bakul Institute for Superhard Materials
Autor responsável pela correspondência
Email: lavrinenko@ism.kiev.ua
Ucrânia, vul. Avtozavods’ka 2, Kyiv, 04074
V. Molchanov
Dniprovsk State Technical University
Autor responsável pela correspondência
Email: v_molchanov@ukr.net
Ucrânia, vul. Dniprobudivska 2, Kamianske, 51900
V. Solod
Dniprovsk State Technical University
Email: v_molchanov@ukr.net
Ucrânia, vul. Dniprobudivska 2, Kamianske, 51900
L. Prots
Institute of Electron Physics
Email: v_molchanov@ukr.net
Ucrânia, vul. Universytetska 21, Uzhhorod, 88017
Arquivos suplementares
