Email this article Influence of Obtaining Conditions on Microstructure, Phase Composition and Properties of Eutectic Alloy of WC-W2C System
- Authors: Trosnikova I.Y.1, Loboda P.I.1
-
Affiliations:
- “Igor Sikorsky Kyiv Polytechnic Institute”
- Issue: Vol 41, No 1 (2019)
- Pages: 49-52
- Section: Production, Structure, Properties
- URL: https://journals.rcsi.science/1063-4576/article/view/186431
- DOI: https://doi.org/10.3103/S1063457619010076
- ID: 186431
Cite item
Open Access
Access granted
Subscription Access
Abstract
The influence of the obtaining conditions on microstructure, phase composition and properties of eutectic alloy of the WC-W2C system (relit), which is widely used as a surfacing material to strengthen the wearing parts, was installed. Using scanning electron microscopy, X-ray diffraction and durometric analyzes, it was found that the increase in mechanical properties is satisfactorily correlated with a decrease in the ratio between the number of phases of W2C, WC and WC1−x, the thickness of the phase layers in the grains, and the elongation of the latter.
About the authors
I. Yu. Trosnikova
“Igor Sikorsky Kyiv Polytechnic Institute”
Author for correspondence.
Email: irina2510@ukr.net
Ukraine, Kyiv
P. I. Loboda
“Igor Sikorsky Kyiv Polytechnic Institute”
Email: irina2510@ukr.net
Ukraine, Kyiv
Supplementary files
