The influence of high-voltage electrical discharge on dispersion and structure of B4C powder


Citar

Texto integral

Acesso aberto Acesso aberto
Acesso é fechado Acesso está concedido
Acesso é fechado Somente assinantes

Resumo

The influence of high-voltage electrical discharge on the distilled water–boron carbide powder dispersion system has been studied, making it possible to clarify the relationship between the discharge parameters and the powder dispersion and structure. It is shown that the necessary conditions for effective dispersion of the boron carbide powder are the compression wave pressure amplitude at least ca. 100 MPa and the specific processing energy about 20 MJ/kg.

Sobre autores

M. Prystash

Institute of Pulse Processes and Technologies

Email: sizonenko43@rambler.ru
Ucrânia, prosp. Bogoyavlens’ky 43A, Mykolaiv, 54018

V. Trehub

National Technical University of Ukraine “Kyiv Polytechnic Institute”

Email: sizonenko43@rambler.ru
Ucrânia, prosp. Peremohy 37, Kyiv, 03056

O. Syzonenko

Institute of Pulse Processes and Technologies

Autor responsável pela correspondência
Email: sizonenko43@rambler.ru
Ucrânia, prosp. Bogoyavlens’ky 43A, Mykolaiv, 54018

P. Loboda

National Technical University of Ukraine “Kyiv Polytechnic Institute”

Email: sizonenko43@rambler.ru
Ucrânia, prosp. Peremohy 37, Kyiv, 03056

A. Zaichenko

Institute of Pulse Processes and Technologies

Email: sizonenko43@rambler.ru
Ucrânia, prosp. Bogoyavlens’ky 43A, Mykolaiv, 54018

Ye. Solodkyi

National Technical University of Ukraine “Kyiv Polytechnic Institute”

Email: sizonenko43@rambler.ru
Ucrânia, prosp. Peremohy 37, Kyiv, 03056

A. Torpakov

Institute of Pulse Processes and Technologies

Email: sizonenko43@rambler.ru
Ucrânia, prosp. Bogoyavlens’ky 43A, Mykolaiv, 54018

Arquivos suplementares

Arquivos suplementares
Ação
1. JATS XML

Declaração de direitos autorais © Allerton Press, Inc., 2017