CONV-3D Code Application for CFD-Modeling of Lead-Bismuth Coolant
- Авторы: Chudanov V.V.1, Aksenova A.E.1, Makarevich A.A.1, Pervichko V.A.1
-
Учреждения:
- Institute of Problems in the Safe Development of Nuclear Energy, Russian Academy of Sciences (IBRAE RAN)
- Выпуск: Том 123, № 2 (2017)
- Страницы: 87-92
- Раздел: Article
- URL: https://journals.rcsi.science/1063-4258/article/view/248650
- DOI: https://doi.org/10.1007/s10512-017-0306-0
- ID: 248650
Цитировать
Аннотация
The results of testing the three-dimensional CFD-code on problems very close to real processes for lead–bismuth eutectic are presented: flow in a 19-fuel element assembly with three spacing lattices and convection in the ‘tumbler’ model. The results of convergence on a sequence of grids permit drawing the conclusion that for a 19-fuel element assembly the error in the calculation of the friction coefficient on a more finely divided grid does not exceed 10% with two-fold smaller grid step in each direction. Similar arguments are valid for the calculation of the hydraulic resistance coefficient.
Об авторах
V. Chudanov
Institute of Problems in the Safe Development of Nuclear Energy, Russian Academy of Sciences (IBRAE RAN)
Email: j-atomicenergy@yandex.ru
Россия, Moscow
A. Aksenova
Institute of Problems in the Safe Development of Nuclear Energy, Russian Academy of Sciences (IBRAE RAN)
Email: j-atomicenergy@yandex.ru
Россия, Moscow
A. Makarevich
Institute of Problems in the Safe Development of Nuclear Energy, Russian Academy of Sciences (IBRAE RAN)
Email: j-atomicenergy@yandex.ru
Россия, Moscow
V. Pervichko
Institute of Problems in the Safe Development of Nuclear Energy, Russian Academy of Sciences (IBRAE RAN)
Email: j-atomicenergy@yandex.ru
Россия, Moscow
Дополнительные файлы
