Results of Studies of BN-600 Fuel Rods with Mixed Uranium-Plutonium Nitride Fuel and ChS68-ID c.d. Steel Cladding


Citar

Texto integral

Acesso aberto Acesso aberto
Acesso é fechado Acesso está concedido
Acesso é fechado Somente assinantes

Resumo

Reactor tests in BN-600 and post-reactor studies of experimental FA of fuel rods with mixed nitride fuel and different cladding are being conducted in Project Breakthrough. In the present article, the irradiation parameters of fuel rods with mixed nitride fuel and cladding made from ChS68-ID c.d. austenitic steel are presented: maximum linear power density 38.3 kW/m, maximum fuel burnup 7.5% h.a., and maximum damage dose 73.6 dpa. No depressurization of the fuel elements was recorded. The results of post-reactor examination (PIE) of the irradiated fuel rods are presented – swelling, gas release from fuel, and mechanical and corrosion characteristics of the cladding.

Sobre autores

A. Grachev

Innovation-Technology Center for Project Breakthrough (ITTsP Proryv)

Autor responsável pela correspondência
Email: info@propyv2020.ru
Rússia, Moscow

L. Zabud’ko

Innovation-Technology Center for Project Breakthrough (ITTsP Proryv)

Email: info@propyv2020.ru
Rússia, Moscow

Yu. Ivanov

Bochvar High-Technology Research Institute of Inorganic Materials (VNIINM)

Email: info@propyv2020.ru
Rússia, Moscow

M. Skupov

Bochvar High-Technology Research Institute of Inorganic Materials (VNIINM)

Email: info@propyv2020.ru
Rússia, Moscow

E. Zvir

State Science Center of the Russian Federation – Research Institute of Atomic Reactors (SSC RIAR)

Email: info@propyv2020.ru
Rússia, Dimitrovgrad

F. Kryukov

State Science Center of the Russian Federation – Research Institute of Atomic Reactors (SSC RIAR)

Email: info@propyv2020.ru
Rússia, Dimitrovgrad

O. Nikitin

State Science Center of the Russian Federation – Research Institute of Atomic Reactors (SSC RIAR)

Email: info@propyv2020.ru
Rússia, Dimitrovgrad

E. Marinenko

Leipunskii Institute of Physics and Power Engineering (IPPE)

Email: info@propyv2020.ru
Rússia, Obninsk

S. Porollo

Leipunskii Institute of Physics and Power Engineering (IPPE)

Email: info@propyv2020.ru
Rússia, Obninsk

Arquivos suplementares

Arquivos suplementares
Ação
1. JATS XML

Declaração de direitos autorais © Springer Science+Business Media, LLC, part of Springer Nature, 2019