Enviar artigo por via de e-mail Interaction between Fе–Ni Austenitic Alloy and Minor Amounts of Mechanically Milled C60 Fullerene at High Temperatures and Pressures
- Autores: Borisova P.A.1, Blanter M.S.2, Brazhkin V.V.3, Filonenko V.P.3, Murashev M.M.1
-
Afiliações:
- National Research Center Kurchatov Institute
- Russian Technological University (MIREA)
- Vereshchagin Institute for High Pressure Physics, Russian Academy of Sciences
- Edição: Volume 83, Nº 10 (2019)
- Páginas: 1219-1222
- Seção: Article
- URL: https://journals.rcsi.science/1062-8738/article/view/187549
- DOI: https://doi.org/10.3103/S1062873819100058
- ID: 187549
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
The sintering of Fe–Ni austenitic alloy at 4.5 GPa, 900°C and 8 GPa, 800°C with mechanically milled fullerene C60, 1.7 at % results in the dissolution of carbon in the FCC lattice of the alloy, and the formation of carbides and isolated regions containing fine powder mixes of the alloy and carbon phase. The microhardness of these regions is twice as high as that of the alloy.
Sobre autores
P. Borisova
National Research Center Kurchatov Institute
Email: mike.blanter@gmail.com
Rússia, Moscow, 123182
M. Blanter
Russian Technological University (MIREA)
Autor responsável pela correspondência
Email: mike.blanter@gmail.com
Rússia, Moscow, 119454
V. Brazhkin
Vereshchagin Institute for High Pressure Physics, Russian Academy of Sciences
Email: mike.blanter@gmail.com
Rússia, Troitsk, Moscow oblast, 108840
V. Filonenko
Vereshchagin Institute for High Pressure Physics, Russian Academy of Sciences
Email: mike.blanter@gmail.com
Rússia, Troitsk, Moscow oblast, 108840
M. Murashev
National Research Center Kurchatov Institute
Email: mike.blanter@gmail.com
Rússia, Moscow, 123182
Arquivos suplementares
