Enviar artigo por via de e-mail Thermophysical parameters of additive gap welding with the laser cladding of powders
- Autores: Vasiltsov V.V.1, Galushkin M.G.1, Grezev A.N.1, Ilyichev I.N.1
-
Afiliações:
- Institute on Laser and Information Technologies
- Edição: Volume 80, Nº 12 (2016)
- Páginas: 1504-1508
- Seção: Proceedings of the XI International Conference “Lasers and Laser Information Technologies: Fundamental Problems and Application”
- URL: https://journals.rcsi.science/1062-8738/article/view/184913
- DOI: https://doi.org/10.3103/S1062873816080402
- ID: 184913
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
The simulation and optimization of the main process variables of gap welding with the laser cladding of metallic powders is considered. The adsorption coefficient of powdered particles as a function of particle radius is analyzed for powder feeding via a metering unit. Optimum particle velocities and the weight flow rate of the metering device are determined. Preliminary experimental results are presented.
Sobre autores
V. Vasiltsov
Institute on Laser and Information Technologies
Autor responsável pela correspondência
Email: v.vasiltsov@mail.ru
Rússia, Shatura, Moscow oblast, 140700
M. Galushkin
Institute on Laser and Information Technologies
Email: v.vasiltsov@mail.ru
Rússia, Shatura, Moscow oblast, 140700
A. Grezev
Institute on Laser and Information Technologies
Email: v.vasiltsov@mail.ru
Rússia, Shatura, Moscow oblast, 140700
I. Ilyichev
Institute on Laser and Information Technologies
Email: v.vasiltsov@mail.ru
Rússia, Shatura, Moscow oblast, 140700
Arquivos suplementares
