Enviar artigo por via de e-mail Wetting of Reactor Steels by a PbBi Eutectic Melt with Lithium
- Autores: Taova T.M.1, Khokonov K.B.1, Alchagirov B.B.1, Khokonov M.K.1
-
Afiliações:
- Berbekov Kabardino-Balkarian State University
- Edição: Volume 83, Nº 6 (2019)
- Páginas: 745-748
- Seção: Article
- URL: https://journals.rcsi.science/1062-8738/article/view/187422
- DOI: https://doi.org/10.3103/S1062873819060315
- ID: 187422
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
The wetting of 12Cr18Ni10Ti and EK-173 reactor steels by an eutectic melt of PbBi with lithium under conditions of a vacuum and an argon atmosphere is studied in a wide range of temperatures. A tendency is observed toward the improved wetting of 12Cr18Ni10Ti steel with a higher lithium content in a eutectic melt of PbBi. It is found that an eutectic PbBi alloy with 20.86 at % of Li content tends to improve the wetting process under the conditions of a vacuum and an argon environment.
Sobre autores
T. Taova
Berbekov Kabardino-Balkarian State University
Email: khokon6@mail.ru
Rússia, Nalchik, 360004
Kh. Khokonov
Berbekov Kabardino-Balkarian State University
Autor responsável pela correspondência
Email: khokon6@mail.ru
Rússia, Nalchik, 360004
B. Alchagirov
Berbekov Kabardino-Balkarian State University
Email: khokon6@mail.ru
Rússia, Nalchik, 360004
M. Khokonov
Berbekov Kabardino-Balkarian State University
Email: khokon6@mail.ru
Rússia, Nalchik, 360004
Arquivos suplementares
