Email this article Modeling the Insertion Losses of Dielectric Resonators in Microwave Filter Designs
- Authors: Alexeychik L.V.1
-
Affiliations:
- National Research University Moscow Power Engineering Institute (NRU MPEI)
- Issue: Vol 82, No 8 (2018)
- Pages: 913-917
- Section: Proceedings of the XXV International Conference “Electromagnetic Field and Materials (Fundamental Physical Research)”
- URL: https://journals.rcsi.science/1062-8738/article/view/185739
- DOI: https://doi.org/10.3103/S1062873818080051
- ID: 185739
Cite item
Open Access
Access granted
Subscription Access
Abstract
Modeling the insertion losses of microwave filters with dielectric resonators is based on calculating forced oscillations of polarization currents (their amplitudes and phases in the range frequencies) for different designs of microwave filters (e.g., stop-band and pass-band). Knowing the distribution of insertion losses in individual sections of a filter allows us to determine the transfer of heat by dielectric resonators in a vacuum or otherwise.
About the authors
L. V. Alexeychik
National Research University Moscow Power Engineering Institute (NRU MPEI)
Author for correspondence.
Email: alekseych@mail.ru
Russian Federation, Moscow, 111250
Supplementary files
