Phase Transformations and Misorientations in Ferrite-Martensitic Steel upon Intense Plastic Deformation
- 作者: Koneva N.A.1, Popova N.A.1,2, Nikonenko E.L.1,3, Sizonenko N.R.1
-
隶属关系:
- Tomsk State University of Architecture and Building
- Institute of Strength Physics and Materials Science, Siberian Branch
- National Research Tomsk Polytechnic University
- 期: 卷 82, 编号 7 (2018)
- 页面: 769-772
- 栏目: Article
- URL: https://journals.rcsi.science/1062-8738/article/view/185432
- DOI: https://doi.org/10.3103/S1062873818070274
- ID: 185432
如何引用文章
详细
Changes in the structural and phase state of low-carbon steel with a mixed structure of tempered martensite and ferrite, and deformed by equal channel angular pressing (ECAP), are analyzed by means of transmission electronic microscopy and X-ray diffraction. The impact ECAP has on the phase composition and morphology of the alloy is determined. The behavior of the carbide phase is studied. Grain misorientations are measured. Special attention is given to the problem of fine grain formation upon ECAP.
作者简介
N. Koneva
Tomsk State University of Architecture and Building
Email: natalya-popova-44@mail.ru
俄罗斯联邦, Tomsk, 634003
N. Popova
Tomsk State University of Architecture and Building; Institute of Strength Physics and Materials Science, Siberian Branch
编辑信件的主要联系方式.
Email: natalya-popova-44@mail.ru
俄罗斯联邦, Tomsk, 634003; Tomsk, 634021
E. Nikonenko
Tomsk State University of Architecture and Building; National Research Tomsk Polytechnic University
Email: natalya-popova-44@mail.ru
俄罗斯联邦, Tomsk, 634003; Tomsk, 634050
N. Sizonenko
Tomsk State University of Architecture and Building
Email: natalya-popova-44@mail.ru
俄罗斯联邦, Tomsk, 634003
补充文件
